Instant On - Software

 View Only

Instant On 1930 - Switching Software Portal

By Jamie E posted 06-03-2020 11:29 AM

  

For those of you who are managing your switches locally this will be your single point for all your switching software needs. Below you will find current and archived software releases along with supporting documentation.

 

Version Software .mibs Release Notes Additional Notes
1.0.1.0 Download Download Download
1.0.2.0 Download Download Download
1.0.4.0 Download Download Download
1.0.5.0 Download Download Download
1.0.7.0 Download Download Download *This is for local management only
2.5.0.42 Download Download Download *Release notes have been updated
2.6.0.74 Download Download Download *Release notes have been updated
2.7.0.103 Download Download Download


Current Version: 2.6.0.74

Products Supported:
JL680A Aruba Instant On 1930 8G 2SFP Switch
JL681A Aruba Instant On 1930 8G Class 4 PoE 2SFP 124W Switch
JL682A Aruba Instant On 1930 24G 4SFP/SFP+ Switch
JL683A Aruba Instant On 1930 24G Class 4 PoE 4SFP/SFP+ 195W Switch
JL683B Aruba Instant On 1930 24G Class 4 PoE 4SFP/SFP+ 195W Switch
JL684A Aruba Instant On 1930 24G Class 4 PoE 4SFP/SFP+ 370W Switch
JL684B Aruba Instant On 1930 24G Class 4 PoE 4SFP/SFP+ 370W Switch
JL685A Aruba Instant On 1930 48G 4SFP/SFP+ Switch
JL686A Aruba Instant On 1930 48G Class 4 PoE 4SFP/SFP+ 370W Switch
JL686B Aruba Instant On 1930 48G Class 4 PoE 4SFP/SFP+ 370W Switch

40 comments
1204 views

Comments

10 days ago

8G 2SFP Switch. Updated from 1.0.5 to 2.70.103
vlan tagging for pppoe worked fine and now broken. Any tagging manipulations dont help. What to do? I want to rollback to 1.0.5 but it seems impossible. Developers locked downgrade.
related to "wrong magic number error":
You have to unzip the downloaded file and upload the .swi file to the switch.

16 days ago

@ mnewgard  Try TFTP.  I am going to assume you are uploading the correct firmware file ending with .swi extension.  ​

17 days ago

@FL have tried to go to 2.6 then to 2.7 with the same error. Go to maintenance-backup and update files- update(transfer a file to the swtich)-backup image- and trying https​

17 days ago

@mnewgard  Try going from 2.5 to 2.6 and then 2.7.  I've never seen the wrong magic number error.  Are you copying the firmware to the "Backup Image" under the file type?​

17 days ago

@FL11 have tried chrome and firefox. The error I am receiving is "Copy: Wrong magic number- downloaded file is not compatible" ​

17 days ago

@MarkusWeiler  You might have to perform several step upgrades in order to get to the latest version.  I remember reading somewhere that you couldn't go directly from 1.0 to 2.7 because there are some major revisions in the firmware.  ​

17 days ago

@mnewgard you can try using a tftp server to upload the firmware.  You can also try Firefox.  I just updated from 2.5 to 2.7.  Are you getting an error?​

17 days ago

having same issue when trying to update firmware. Came with 2.5 and we tried both 2.5 and 2.7 with error wrong magic number

20 days ago

Just tried several times to upgrade from 1.0.7.0 (141) to either the most recent 2.7.0.103 or the first 2.xxx version 2.5.0.42. Both uploads fail with the message "Copy: Wrong magic number - downloaded file is not compatible!".
Anyone else has or had this problem? Found nothing about this..

06-29-2022 09:50 PM

We are also waiting on SSH functionality? Is there an ETA?

03-25-2022 01:19 PM

Any news about access the switch by SSH or Telnet to get CLI?

03-17-2022 12:44 AM

@WK83 SNMP is available when managed locally via the web page of the switch. Not too sure if it is available if managed via the cloud controller, I prefer to manage our switches locally as there seems to be more functionlaity. ​

03-16-2022 09:59 AM

Does version 2.5.0.42 allow enabling SNMP while in Web Management mode?

02-15-2022 05:17 PM

I was on 1.0.7 and the switch updated itself to 2.5 without my 'consent'
/Locally Managed

12-07-2021 05:04 PM

Thank you very much by your reponse. I will check the last version in my SW.

Best Regards.

12-04-2021 04:21 PM

Hey @itgiec,

This page has firmware updates for users that maintain the switch by managing it locally and not utilizing the cloud function.  In the setup process, you are asked how you are going to manage the switch, locally or through the instanton portal.  Locally just means you log into the IP of the switch and perform all updates directly on the switch.  Hope this helps ​

12-02-2021 05:18 PM

Hi all.-

May I know what it means that version 1.0.7.0 is Local Management only. I can understand that it does not work with Aruba cloud to be able to monitor my switch?

Thank you very much.

11-11-2021 01:18 PM

Hey @Jimmy_Kinateder ,

Try a different browser when uploading a new firmware.  I had the same issue using Chrome.  I was able to perform the upgrade using Firefox.​
** Also, make sure to select "Backup Image" when selecting file type.**

11-08-2021 07:16 AM

The ifSpeed SNMP object identifier incorrectly reports the network interface speed in MB per second.

TABLE IfMib.ifTable(1.3.6.1.2.1.2.2) from 192.168.x.x
-----------------------------------------------------
| ifIndex ¦ ifType ¦ ifMtu ¦ ifSpeed ¦ ifHighSpeed |
-----------------------------------------------------
| 1 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 2 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 3 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 4 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 5 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 6 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 7 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 8 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 9 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 10 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 11 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 12 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 13 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 14 ¦ eth (6) ¦ 1500 ¦ 100 ¦ 100 |
| 15 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 16 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 17 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 18 ¦ eth (6) ¦ 1500 ¦ 100 ¦ 100 |
| 19 ¦ eth (6) ¦ 1500 ¦ 100 ¦ 100 |
| 20 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 21 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 22 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 23 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 24 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 49 ¦ eth (6) ¦ 1500 ¦ 10000 ¦ 10000 |
| 50 ¦ eth (6) ¦ 1500 ¦ 10000 ¦ 10000 |
| 51 ¦ eth (6) ¦ 1500 ¦ 10000 ¦ 10000 |
| 52 ¦ eth (6) ¦ 1500 ¦ 10000 ¦ 10000 |
-----------------------------------------------------

Can anyone advices?

11-04-2021 04:02 PM

Hi,
Update yesterday on 2 switch without problem

11-04-2021 03:24 PM

Is anyone having issues updating firmware to either 1_0_5_0 or 1_0_7_0?   I am receiving the following for both when I have tried to update: "Copy: Configuration copy failed. Configuration file header is invalid or not found."

10-13-2021 11:26 PM

Is anyone enable SNMP feature at firmware version 1.0.5(139)? 
I try to enable snmp and managed switch by  HPE IMC , but IMC  device category as Desktop ..

following is my  snmp configuration which export from my 1930 switch 

snmp-server server
snmp-server community public ro 192.168.99.190 view public
snmp-server community private rw 192.168.99.190 view private
snmp-server host 192.168.99.190 traps version 2c public

Can anyone advices ?

09-02-2021 01:58 AM

"InstantOn_1930_1_0_5_0_139.swi" bu güncellemeyi yapınca menülere zor girmeye başladı

08-25-2021 03:23 AM

Why is is so hard for HPE to provide firmware?  I tried the search function looking for the firmware for JL683A as you would expect via the support pages, but no, I have to find it in a bleeping community post via Google?

Poor form.  Lift your game HPE.

07-31-2021 03:39 PM

When updating firmware from version 1.0.1.0 (116) to InstantOn_1930_1_0_5_0_139 it recognizes the SFP + BIDI 10GBASE-BX SFP + 1270nm-TX / 1330nm-RX 10km DOM LC SMF Transceiver Module. You see a problem in the GUI because the 10G link speed configuration is stuck on ports 49, 50, 51 and 52, when uninstalling the SFP it does not return to autonegotiation.

07-19-2021 09:23 AM

now it seems to be working again....

07-19-2021 07:44 AM

Thought it was just me. I had trouble downloading any of these files. Would not work properly when clicked. Right click and save link as resulted in failed- forbidden.

07-19-2021 07:21 AM

All download links are dead? :(

Can someone solve this issue?

01-25-2021 05:26 AM

Jamie,

when do we expect  link to 1.0.3.0 (131)  download ?

01-19-2021 02:21 AM

when customer purchases switches they cone with version 1_0_3_0
why is this version not available for download?

01-18-2021 03:31 PM

Where is the 1.0.3.0 download? New devices come with it installed and it was released a month ago...

01-14-2021 04:41 PM

No 1.0.3.0 download?
InstantOn web portal has it, but not locally managed switches?

01-11-2021 03:45 PM

Where is the 1.0.3.0 download?

12-16-2020 01:59 AM

Why is version 1.0.3.0 (131) not available for download ?
Just received 2 new 1930's with it already installed. 

12-11-2020 08:09 AM

Isnt 1.0.1.0_125 a typing error ? you get 1.0.2.0_125 when you click download!

12-11-2020 03:54 AM

As you can see from the banner on the top of this page, this is only meant for the instant on switches, not access points.

I understand it in such a way that 1.0.2.0_125 is a normal non beta release. It's running on my switch as well.

12-10-2020 07:41 AM

is 1.02 still beta as it is listed in the downloads but not as latest version? will there be AP firmware listed here is well?

10-29-2020 11:25 PM

InstantOn_1930_1.0.2.0_125.swi
Why did you disappear?
Is there a problem?
When is the next version coming?