Instant On 1930 - Switching Software Portal

By Jamie E posted 06-03-2020 11:29 AM

Recommend

For those of you who are managing your switches locally this will be your single point for all your switching software needs. Below you will find current and archived software releases along with supporting documentation.

Version	Software	.mibs	Release Notes	Additional Notes
1.0.1.0	Download	Download	Download
1.0.2.0	Download	Download	Download
1.0.4.0	Download	Download	Download
1.0.5.0	Download	Download	Download
1.0.7.0	Download	Download	Download	*This is for local management only
2.5.0.42	Download	Download	Download
2.6.0.74	Download	Download

Current Version: 2.6.0.74

Products Supported:
JL680A Aruba Instant On 1930 8G 2SFP Switch
JL681A Aruba Instant On 1930 8G Class 4 PoE 2SFP 124W Switch
JL682A Aruba Instant On 1930 24G 4SFP/SFP+ Switch
JL683A Aruba Instant On 1930 24G Class 4 PoE 4SFP/SFP+ 195W Switch
JL684A Aruba Instant On 1930 24G Class 4 PoE 4SFP/SFP+ 370W Switch
JL685A Aruba Instant On 1930 48G 4SFP/SFP+ Switch
JL686A Aruba Instant On 1930 48G Class 4 PoE 4SFP/SFP+ 370W Switch

Attachments

InstantOn_1930_1.0.1.0_116.zip
1930_MIBS_1.0.1.116.zip
InstantOn_1930_1_0_2_0_125.zip
1930_MIBS_1_0_2_0_125.zip
InstantOn_1930_1_0_4_0_133.swi
1930_MIBS_1_0_4_0_133.zip
XHPE_Pilgrim_MIBs_1_0_5_0_139.zip
InstantOn_1930_1_0_5_0_139.swi
HPE_Pilgrim_MIBs_1_0_5_0_139.zip

29 comments

1044 views

Comments

Luke

03-25-2022 01:19 PM

Any news about access the switch by SSH or Telnet to get CLI?

FL11

03-17-2022 12:44 AM

@WK83 SNMP is available when managed locally via the web page of the switch. Not too sure if it is available if managed via the cloud controller, I prefer to manage our switches locally as there seems to be more functionlaity.

WK83

03-16-2022 09:59 AM

Does version 2.5.0.42 allow enabling SNMP while in Web Management mode?

saygooda

02-15-2022 05:17 PM

I was on 1.0.7 and the switch updated itself to 2.5 without my 'consent'
/Locally Managed

itgiec

12-07-2021 05:04 PM

Thank you very much by your reponse. I will check the last version in my SW.

Best Regards.

FL11

12-04-2021 04:21 PM

Hey @itgiec,

This page has firmware updates for users that maintain the switch by managing it locally and not utilizing the cloud function. In the setup process, you are asked how you are going to manage the switch, locally or through the instanton portal. Locally just means you log into the IP of the switch and perform all updates directly on the switch. Hope this helps

itgiec

12-02-2021 05:18 PM

Hi all.-

May I know what it means that version 1.0.7.0 is Local Management only. I can understand that it does not work with Aruba cloud to be able to monitor my switch?

Thank you very much.

FL11

11-11-2021 01:18 PM

Hey @Jimmy_Kinateder ,

Try a different browser when uploading a new firmware. I had the same issue using Chrome. I was able to perform the upgrade using Firefox.
** Also, make sure to select "Backup Image" when selecting file type.**

JB49

11-08-2021 07:16 AM

The ifSpeed SNMP object identifier incorrectly reports the network interface speed in MB per second.

TABLE IfMib.ifTable(1.3.6.1.2.1.2.2) from 192.168.x.x
-----------------------------------------------------
| ifIndex ¦ ifType ¦ ifMtu ¦ ifSpeed ¦ ifHighSpeed |
-----------------------------------------------------
| 1 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 2 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 3 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 4 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 5 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 6 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 7 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 8 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 9 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 10 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 11 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 12 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 13 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 14 ¦ eth (6) ¦ 1500 ¦ 100 ¦ 100 |
| 15 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 16 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 17 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 18 ¦ eth (6) ¦ 1500 ¦ 100 ¦ 100 |
| 19 ¦ eth (6) ¦ 1500 ¦ 100 ¦ 100 |
| 20 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 21 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 22 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 23 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 24 ¦ eth (6) ¦ 1500 ¦ 1000 ¦ 1000 |
| 49 ¦ eth (6) ¦ 1500 ¦ 10000 ¦ 10000 |
| 50 ¦ eth (6) ¦ 1500 ¦ 10000 ¦ 10000 |
| 51 ¦ eth (6) ¦ 1500 ¦ 10000 ¦ 10000 |
| 52 ¦ eth (6) ¦ 1500 ¦ 10000 ¦ 10000 |
-----------------------------------------------------

Can anyone advices?

FL20

11-04-2021 04:02 PM

Hi,
Update yesterday on 2 switch without problem

Jimmy_Kinateder

11-04-2021 03:24 PM

Is anyone having issues updating firmware to either 1_0_5_0 or 1_0_7_0? I am receiving the following for both when I have tried to update: "Copy: Configuration copy failed. Configuration file header is invalid or not found."

Allen

10-13-2021 11:26 PM

Is anyone enable SNMP feature at firmware version 1.0.5(139)?
I try to enable snmp and managed switch by HPE IMC , but IMC device category as Desktop ..

following is my snmp configuration which export from my 1930 switch

snmp-server server
snmp-server community public ro 192.168.99.190 view public
snmp-server community private rw 192.168.99.190 view private
snmp-server host 192.168.99.190 traps version 2c public

Can anyone advices ?

fevzikeles

09-02-2021 01:58 AM

"InstantOn_1930_1_0_5_0_139.swi" bu güncellemeyi yapınca menülere zor girmeye başladı

GregMitchell

08-25-2021 03:23 AM

Why is is so hard for HPE to provide firmware? I tried the search function looking for the firmware for JL683A as you would expect via the support pages, but no, I have to find it in a bleeping community post via Google?

Poor form. Lift your game HPE.

FH31

07-31-2021 03:39 PM

When updating firmware from version 1.0.1.0 (116) to InstantOn_1930_1_0_5_0_139 it recognizes the SFP + BIDI 10GBASE-BX SFP + 1270nm-TX / 1330nm-RX 10km DOM LC SMF Transceiver Module. You see a problem in the GUI because the 10G link speed configuration is stuck on ports 49, 50, 51 and 52, when uninstalling the SFP it does not return to autonegotiation.

kwalter

07-19-2021 09:23 AM

now it seems to be working again....

Jarvar

07-19-2021 07:44 AM

Thought it was just me. I had trouble downloading any of these files. Would not work properly when clicked. Right click and save link as resulted in failed- forbidden.

kwalter

07-19-2021 07:21 AM

All download links are dead? :(

Can someone solve this issue?

sa52

07-19-2021 04:51 AM

InstantOn_1930_1_0_5_0_139.swi dead link

mveselic

01-25-2021 05:26 AM

Jamie,

when do we expect link to 1.0.3.0 (131) download ?

Samuelh

01-19-2021 02:21 AM

when customer purchases switches they cone with version 1_0_3_0
why is this version not available for download?

McDonnell

01-18-2021 03:31 PM

Where is the 1.0.3.0 download? New devices come with it installed and it was released a month ago...

FL40

01-14-2021 04:41 PM

No 1.0.3.0 download?
InstantOn web portal has it, but not locally managed switches?

Birchman

01-11-2021 03:45 PM

Where is the 1.0.3.0 download?

hassel

12-16-2020 01:59 AM

Why is version 1.0.3.0 (131) not available for download ?
Just received 2 new 1930's with it already installed.

christian@evr.dk

12-11-2020 08:09 AM

Isnt 1.0.1.0_125 a typing error ? you get 1.0.2.0_125 when you click download!

FL27

12-11-2020 03:54 AM

As you can see from the banner on the top of this page, this is only meant for the instant on switches, not access points.

I understand it in such a way that 1.0.2.0_125 is a normal non beta release. It's running on my switch as well.

FL87

12-10-2020 07:41 AM

is 1.02 still beta as it is listed in the downloads but not as latest version? will there be AP firmware listed here is well?

chokyudong

10-29-2020 11:25 PM

InstantOn_1930_1.0.2.0_125.swi
Why did you disappear?
Is there a problem?
When is the next version coming?