Instant On - Wireless

Good evening,

I would like to request the manual control of max transmit power. Others like Ubiquiti support.

Then I have a question regarding of sending SSIDs. There is always an SSID in the air with no name. Even if the real SSID is switched off via scheduling. I would expect the ap is sending nothing at that time.

thanks

@Unwired As features are released they will be included in the firmware releases.

If the SSID has been set with a schedule and the AP will not be broadcasting and will not allow clients to connect during non-active times.

Hello @GThiesen,

thsnaks for your reply. I mean there is always an SSID without a name in the air. Even the real used ssid ist switched off via scheduling. In the picture it is the ssid with b0 at the end of mac address (rest of mac same). In my opinion this nameless ssid should never be there.

WLAN Scan

Regards

@Unwired

@Unwired Thank you for the feedback on this broadcast SSID. The Instant ON AP's are always in mesh listen mode and broadcast this by default.