Instant On - Wireless

 View Only
  • 1.  How to Configure WLC To Work on L3 Protocol & DHCP Server

    Posted 04-12-2022 10:31 AM
    I have setted two WLAN being Employee and Guest. Now, I need:

    1st) Configure the Controller as a DHCP Server for the Guest WLAN;
    2nd) Setup a L3 Interface over internet exit;
    3rd) Route all WLAN Guest traffic through of the Internet only;
    In attached refer a draw with the scheme that I need to work with;

    I possible,
    Could some post a step by step about how to do it?

    ------------------------------
    Jorenilson Santos
    ------------------------------


  • 2.  RE: How to Configure WLC To Work on L3 Protocol & DHCP Server

    Posted 04-14-2022 09:53 AM
    Hey, 

    Checking with my peers because your question may be for our Airheads community team.

    https://community.arubanetworks.com/home 



    ------------------------------
    Aruba Instant On Communications
    ------------------------------



  • 3.  RE: How to Configure WLC To Work on L3 Protocol & DHCP Server

    Posted 04-15-2022 09:12 AM
    Hi JM52 is there any update about to this question? I need urgently to deploy this scenery to my office.​​

    ------------------------------
    Jorenilson Santos
    ------------------------------



  • 4.  RE: How to Configure WLC To Work on L3 Protocol & DHCP Server

    Posted 04-19-2022 12:45 PM
    Hey Jorenilson, 

    Our Airheads Community would be able to assist with this. Please share your concern there and they will be able to help. Airheads Community
    Airheads Community remove preview
    Airheads Community
    View this on Airheads Community >
      

    ------------------------------
    Aruba Instant On Communications
    ------------------------------