Hello everyone!
I am looking into purchasing an Aruba Instant-On AP that will uplink to a Cisco Switch. I have multiple VLANs on my Cisco switch. I was curious if anyone had any experience with this. I currently use a Unify AP that requires I have a native VLAN on the port so the AP can communicate with the controller as the traffic is untagged. I was curious if the Aruba APs have the same limitation in its communication with the controller or if I can set the port to a trunk port like normal or maybe place it on the AP VLAN and the AP forms a CAPWAP tunnel with the controller (similar to using a WLC).
------------------------------
David Gregory
------------------------------