This is a function of your network and how you are configuring things.
Any number of reasons spring to mind:
1 - you gave your AP a static IP.
2 - no DHCP on the other network.
3 - the other network is not able to reach the internet.
Or even 4, booting is sedate and you did not wait long enough.
------------------------------
Still can't change my name from FL17!
------------------------------
Original Message:
Sent: 06-22-2021 05:07 AM
From: Arnold Kraschinski
Subject: Move an AP INH 303 Accesspoint within a buildung.
Hello.
I use the AP INH 303 access point together with a case of mobile devices.
The access point should be connected to our network in one room with LAN-cable an then open up a WLAN for this room. After use the case with the devices and the access point can be moved to another room and they should be used there.
My problem is, that I can set up the access point but if I move it around in the building and connect it to another part of our network, the access point cannot connet again. What am I doing wrong? How can I fix this?
Arnold
------------------------------
Arnold Kraschinski
------------------------------