Ever since the new 2.2.0 firmware after about a day the clients max out around 50mbps down and up. If I reboot the ap speeds return to around 300mbps. I am about 5ft away from the access point with nothing between me and the AP. I have tried on several different wireless clients all experience the same slowness.
I run 5 networks all of them experience the issue. They vary in settings one uses radius for auth the other use wpa. One guest network is limited to 25mbps.
With the previous firmware, I did not experience this but had the issue where clients could connect then complain they couldn't get an IP address. Just not sure what to do, past firmware couldn't even connect now this new one people can connect at horrible speeds.
I know my internet line has plenty of headroom when I run a wired test after testing wireless:
Server: Comcast - Chicago, IL (id = 1776)
ISP: Comcast Cable
Latency: 54.78 ms (23.63 ms jitter)
Download: 905.13 Mbps (data used: 974.2 MB)
Upload: 35.90 Mbps (data used: 60.4 MB)
Packet Loss: Not available.