Instant On - Wireless

 View Only

  • 1.  AP11D Set static IP on WAN (EO) interface for routing mode

    Posted 04-13-2021 05:47 PM
    Is it possible to set a provider assigned static IP on the E0 WAN interface when the AP11D is set in Routing / NAT mode? I can't find any documentation regarding this, it only refers to a PPOE connection with user and pass which is not what I need.

    Thanks

    ------------------------------
    Luca Forattini
    ------------------------------


  • 2.  RE: AP11D Set static IP on WAN (EO) interface for routing mode

    Posted 04-19-2021 02:21 PM
     Factory new AP11D not broadcasting SSID - cannot complete setup. By forattini AP11D Set static IP on WAN (EO) interface for routing mode.

    ------------------------------
    Keith Hardin
    ------------------------------

    Original Message


  • 3.  RE: AP11D Set static IP on WAN (EO) interface for routing mode

    Employee
    Posted 04-19-2021 02:21 PM
    Have you tried using the static IP setting:
    https://www.arubainstanton.com/techdocs/en/content/get-started/pppoe.htm


    ------------------------------
    Sreenath Seshadri
    ------------------------------

    Original Message


  • 4.  RE: AP11D Set static IP on WAN (EO) interface for routing mode

    Posted 04-19-2021 02:32 PM
    Hi, I managed to work it out yes by setting a static IP adn gateway after letting the AP TIMEOUT with RED LED status. Afer this by connecting the AP again to the router I was able to add it to the new site only with it's serial number. The app didn't locate it and it was not broadcasting and SSID during orange/green flash. Evidently the procedure has changed. I have posted a more in depth comment about this in another thread.

    ------------------------------
    Luca Forattini
    IT Manager
    ------------------------------

    Original Message