Instant On - Wired

Expand all | Collapse all

DAC Error

  • 1.  DAC Error

    Posted 08-16-2020 04:33 PM

    When I insert my Tripplite 1M DAC, the switch throws an error.  I known in other Aruba products you can surpress DAC compatiblity warnings. How is this accomplished on this switch line?  I rather reserve the warning signals for things that actually matter to me.

  • 2.  RE: DAC Error

    Posted 08-17-2020 12:26 PM

    @CaptainPlanet The 1930 switch will support 3rd party optics, but has no way to turn off alerts for those optics.

  • 3.  RE: DAC Error

    Posted 10-01-2020 05:00 AM


    I got Cisco DAC Cable working, its listed as not supported in my Log.

    Any chances to overwrite the error, as the switch blinks continously red?



  • 4.  RE: DAC Error

    Posted 10-01-2020 10:42 AM

    @Xeroxxx Unfortunately it's a 3rd party optic and can't be overwritten.

  • 5.  RE: DAC Error

    Posted 10-02-2020 12:38 PM

    So its intended if you use a 3rd Party DAC the switch continously blinks orange?

    Then I would like to do a feature request to acknowledge this warning/error without getting support for that.


    Thank you

  • 6.  RE: DAC Error

    Posted 10-14-2020 11:00 AM

    @Xeroxxx I had the same issue with a dac from my switch to my router. I ended up with two sfp+ transceivers from 10gtek. Cost $20 each so I could get an Intel comp one for the firewall and HPP/Aruba compatible one for the switch, then a short patch cable. Cost a little more but still not bad and has been working great.

  • 7.  RE: DAC Error

    Posted 11-02-2020 07:44 AM
    Thanks. I'll be doing the same.