Instant On - Wired

 View Only

  • 1.  LACP Client not showing in Connected Clients

    Posted 12-27-2021 08:04 AM
    I have a NAS configured to use a LACP link aggregation on my 1930 switch. Everything works and the device is on the network. However when i browse to the AIO portal and look at devices, the NAS is not listed there.

    Is this an issue due to the LACP, or static IP? 

    Thanks

    ------------------------------
    ELiasz
    ------------------------------


  • 2.  RE: LACP Client not showing in Connected Clients

    Employee
    Posted 01-06-2022 05:22 PM
    Hi, 

    I'm going to check with our internal team about this. I appreciate your patience and Happy New Year.

    ------------------------------
    Aruba Instant On Communications
    ------------------------------

    Original Message


  • 3.  RE: LACP Client not showing in Connected Clients

    Employee
    Posted 01-11-2022 06:52 PM
    Hey Eliasz,

    Can you give us more information regarding your configuration and whether you're in cloud mode?


    ------------------------------
    Aruba Instant On Communications
    ------------------------------

    Original Message


  • 4.  RE: LACP Client not showing in Connected Clients

    Posted 01-12-2022 11:01 AM
    Hi,

    Sure, i have a 1930 switch, 1930 24G PoE 4SFP/SFP+ 195W. Version 1.0.5. It is cloud managed mode.

    The configuration is pretty simple:


    ​I have a Synology DS920 setup with LACP. It's configured on two ports. The link is configured with untagged to my DMZ VLAN, and no tagged VLANs.

    When i look at my clients table i do no see either MAC address for the interfaces on the Synology device. The client side shows LACP is established, and it has a 2gbps connection available. Please let me know if i can provide any more info.


    ------------------------------
    _ELiasz
    ------------------------------

    Original Message


  • 5.  RE: LACP Client not showing in Connected Clients

    Employee
    Posted 01-25-2022 10:25 AM
    Thanks for the screenshot provided, it looks the connection is established. If it's a third-party device, we may not be able to see them on the Aruba Instant On cloud portal.

    ------------------------------
    Aruba Instant On Communications
    ------------------------------

    Original Message