Hi,
Sure, i have a 1930 switch, 1930 24G PoE 4SFP/SFP+ 195W. Version 1.0.5. It is cloud managed mode.
The configuration is pretty simple:
I have a Synology DS920 setup with LACP. It's configured on two ports. The link is configured with untagged to my DMZ VLAN, and no tagged VLANs.
When i look at my clients table i do no see either MAC address for the interfaces on the Synology device. The client side shows LACP is established, and it has a 2gbps connection available. Please let me know if i can provide any more info.
------------------------------
_ELiasz
------------------------------
Original Message:
Sent: 01-11-2022 06:52 PM
From: Jessica Mitchell
Subject: LACP Client not showing in Connected Clients
Hey Eliasz,
Can you give us more information regarding your configuration and whether you're in cloud mode?
------------------------------
Aruba Instant On Communications
Original Message:
Sent: 12-22-2021 09:46 PM
From: Eliasz Zurawka
Subject: LACP Client not showing in Connected Clients
I have a NAS configured to use a LACP link aggregation on my 1930 switch. Everything works and the device is on the network. However when i browse to the AIO portal and look at devices, the NAS is not listed there.
Is this an issue due to the LACP, or static IP?
Thanks
------------------------------
ELiasz
------------------------------