I'm testing with Radius authentication (NPS server + AD) and dynamic VLAN assignment for a wired network. User authentication has so far failed
on my client machine. I double-checked, and the user credentials are correct. My switch's VLAN settings are provided below. Can somebody assist
me if I missed something or if the configurations need to be corrected?
> VLAN
Created VLAN 20 and 30
> VLAN interface configuration
Tagged VLANs: 20,30
Untagged VLAN: 1
> Radius configuration
Enabled "802.1x authentication mode"
Enabled "802.1x accounting mode"
Radius Server IP: 192.168.1.10
Authentication port: 1812
Accounting port: 1813
Server priority: 1
Secret: ########
> Port access control:
Enabled "Admin mode"
> Port configuration (interfaces)
Control mode: Auto
Enabled "VLAN assignment"
PS: This is not a MAC-based authentication.
------------------------------
Pradeep RJ
------------------------------