Instant On - Wired

 View Only
  • 1.  Aruba Instan On 1930 Switch 8 Port

    Posted 11-12-2021 10:58 AM


    I have the Aruba Instant On 1930 Switch 8 Port

    I used the  Aruba J9283D  10G SFP+ 3m DAC Cable but the Switch Port Blinks Orange? 

    I bought these cables with the assumption that they would work with an original Aruba cable.
    Can you tell me why this doesn't work?

    Thomas Haimböck

  • 2.  RE: Aruba Instan On 1930 Switch 8 Port

    Posted 11-13-2021 11:41 AM
    Hi Thomas,

    Unfortunately it appears the transceiver you purchased is not on the approved list for the 8 port's 1G SFP ports.. I've attached a snippet of the list but you can find the full list (including other 1930 series switches) by navigating to the top of the page on the AIO community, click Support > Documentation > Hardware Documentation > Wired Documentation.

    What has worked for some other manufacturer's switches is setting the link speed manually. I'm not sure if this is even an option on AIO switches though. If you want to give it a shot you'll have to do so in Locally managed mode. 
    For info on how to do this, look on Page 40 on the guide which I've linked here: 1930 SwItches management & configuration guide

    I have no idea if that will work, but wish you best of luck!