Hi!
I have a SW 2930 layer 3, they all already have the ospf configured, and I have ping between them, however, I cannot ping from the hosts to any other vlan configured to only the Vlan to which the port belongs. Do you know where I can be wrong or what may be necessary?
Running configuration:
; JL558A Configuration Editor; Created on release #WC.16.07.0003
; Ver #14:01.4f.f8.1d.9b.3f.bf.bb.ef.7c.59.fc.6b.fb.9f.fc.ff.ff.37.ef:02
hostname "SW01"
module 1 type jl558a
ip route 0.0.0.0 0.0.0.0 172.40.2.1
ip routing
snmp-server community "public" unrestricted
router ospf
area backbone
redistribute static
enable
exit
vlan 1
name "DEFAULT_VLAN"
no untagged 1-52
no ip address
ipv6 enable
ipv6 address dhcp full
exit
vlan 10
name "VLAN10"
untagged 37-48
ip address 172.40.2.12 255.255.255.0
ip ospf 172.40.2.12 area backbone
exit
vlan 160
name "VLAN160"
untagged 1-36,49-52
ip address 172.16.160.240 255.255.248.0
ip ospf 172.16.160.240 area backbone
dhcp-server
exit
no tftp server
no autorun
no dhcp config-file-update
no dhcp image-file-update
no dhcp tr69-acs-url
dhcp-server pool "VLAN160"
range 172.16.160.241 172.16.160.250
exit
password manager
password operator
------------------------------
Jean Carlo Fernández
------------------------------