Instant On - Wired

Expand all | Collapse all

changing router and IP Range

  • 1.  changing router and IP Range

    Posted 01-12-2021 09:46 AM
    Hi All,

    just implemented an instant-on 1930 8-port POE Switch and 2 AP12 Access Points.
    I'm currently running them behind my old Wireless Router (radio disabled :) ) to have DHCP etc. So far running like a charm.

    Looking for a 'proper' Router router though and changing the default IP Address range, can i change the IP Range from currently: to something else? Like, should i expect issues with connectivity?

    All devices are on DHCP so i guess a reboot on each device should request a new IP and i should be good to go.
    Is that correct? or does this mean resetting the Switch and the 2 Access Points.

    Thanks for your feedback and thoughts!

    Edward Beuker

  • 2.  RE: changing router and IP Range

    Posted 01-12-2021 11:11 AM
    Changing the IP range should not be a problem and once you power cycle the device it will request a new DHCP lease from the server.

    Greg Thiesen