Instant On - Wired

 View Only

  • 1.  voice vlan QoS marking in local management

    Posted 01-05-2021 05:42 PM
    Our IP phones mark DSCP on their own.  Basically voice on DSCP 46 and signalling on DSCP 24. I used to be able to just trust the marking on a switch port.  However, I do not see anything about "Trusting" in voice vlan configuration page.  And looks like it only supports 802.1P marking, is it correct?

    ------------------------------
    Hunternm
    ------------------------------


  • 2.  RE: voice vlan QoS marking in local management

    Posted 01-15-2021 05:26 PM
    You should be looking under the Quality of Service page. By default the switch trusts both 802.1p and DSCP.

    ------------------------------
    TKWITS
    ------------------------------

    Original Message