Instant On - Wired

Expand all | Collapse all

1930 Models SFP+ compatibility

Jump to Best Answer
  • 1.  1930 Models SFP+ compatibility

    Posted 11-05-2020 12:18 PM
    Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

    Do the devices support j9150A and or j9150D GBIC's?

    ------------------------------
    regards, Niclas Prehm
    ------------------------------


  • 2.  RE: 1930 Models SFP+ compatibility
    Best Answer

    Posted 11-05-2020 02:22 PM
    Niclas The J9150D is the supported transceiver and the datasheet lists the supported transceiver options. The J9150A might work but is not guaranteed.
    https://www.arubainstanton.com/files/DS_AIO_1930SwitchSeries.pdf


    ------------------------------
    Greg Thiesen
    ------------------------------



  • 3.  RE: 1930 Models SFP+ compatibility

    Posted 11-10-2020 03:19 PM
    I was reading through that and I didn't see any reference to BiDi transceivers. Is there any guidance on that?


  • 4.  RE: 1930 Models SFP+ compatibility

    Posted 11-10-2020 03:39 PM
    BiDi transceivers are not supported on the 1930 switches.

    ------------------------------
    Greg Thiesen
    ------------------------------



  • 5.  RE: 1930 Models SFP+ compatibility

    Posted 11-10-2020 07:16 PM
    Thanks.


  • 6.  RE: 1930 Models SFP+ compatibility

    Posted 11-11-2020 04:38 PM
    Thanks. J9150A compatible third party SFP's do not work...

    ------------------------------
    Niclas Prehm
    ------------------------------



  • 7.  RE: 1930 Models SFP+ compatibility

    Posted 11-17-2020 06:34 AM
    It's in the installation guide, not the configuration manual. FYI, I'm using J4859D transceivers manufactured by a third party and labeled as HPE-Aruba compatible in a 1930. B&H wanted $2000 for an HPE-brand transceiver that costs $50 on FS.COM. That seemed a bit rich.