Instant On - Wired

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

Niclas The J9150D is the supported transceiver and the datasheet lists the supported transceiver options. The J9150A might work but is not guaranteed.
https://www.arubainstanton.com/files/DS_AIO_1930SwitchSeries.pdf


------------------------------
Greg Thiesen
------------------------------

Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

I was reading through that and I didn't see any reference to BiDi transceivers. Is there any guidance on that?
Original Message:
Sent: 11-05-2020 02:21 PM
From: Greg Thiesen
Subject: 1930 Models SFP+ compatibility

Niclas The J9150D is the supported transceiver and the datasheet lists the supported transceiver options. The J9150A might work but is not guaranteed.
https://www.arubainstanton.com/files/DS_AIO_1930SwitchSeries.pdf


------------------------------
Greg Thiesen

Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

BiDi transceivers are not supported on the 1930 switches.

------------------------------
Greg Thiesen
------------------------------

Original Message:
Sent: 11-10-2020 03:18 PM
From: John Smith
Subject: 1930 Models SFP+ compatibility

I was reading through that and I didn't see any reference to BiDi transceivers. Is there any guidance on that?
Original Message:
Sent: 11-05-2020 02:21 PM
From: Greg Thiesen
Subject: 1930 Models SFP+ compatibility

Niclas The J9150D is the supported transceiver and the datasheet lists the supported transceiver options. The J9150A might work but is not guaranteed.
https://www.arubainstanton.com/files/DS_AIO_1930SwitchSeries.pdf


------------------------------
Greg Thiesen

Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

Thanks.
Original Message:
Sent: 11-10-2020 03:38 PM
From: Greg Thiesen
Subject: 1930 Models SFP+ compatibility

BiDi transceivers are not supported on the 1930 switches.

------------------------------
Greg Thiesen

Original Message:
Sent: 11-10-2020 03:18 PM
From: John Smith
Subject: 1930 Models SFP+ compatibility

I was reading through that and I didn't see any reference to BiDi transceivers. Is there any guidance on that?
Original Message:
Sent: 11-05-2020 02:21 PM
From: Greg Thiesen
Subject: 1930 Models SFP+ compatibility

Niclas The J9150D is the supported transceiver and the datasheet lists the supported transceiver options. The J9150A might work but is not guaranteed.
https://www.arubainstanton.com/files/DS_AIO_1930SwitchSeries.pdf


------------------------------
Greg Thiesen

Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

Thanks. J9150A compatible third party SFP's do not work...

------------------------------
Niclas Prehm
------------------------------

Original Message:
Sent: 11-05-2020 02:21 PM
From: Greg Thiesen
Subject: 1930 Models SFP+ compatibility

Niclas The J9150D is the supported transceiver and the datasheet lists the supported transceiver options. The J9150A might work but is not guaranteed.
https://www.arubainstanton.com/files/DS_AIO_1930SwitchSeries.pdf


------------------------------
Greg Thiesen

Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

It's in the installation guide, not the configuration manual. FYI, I'm using J4859D transceivers manufactured by a third party and labeled as HPE-Aruba compatible in a 1930. B&H wanted $2000 for an HPE-brand transceiver that costs $50 on FS.COM. That seemed a bit rich.
​
Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

Is there any listing of working 3rd Party Transceivers or can anyone recommend a working SFP+ or SFP Transceiver? (MMF and SMF)
The price of the switches is just right, but I can't tell a customer to buy a transceiver which is more expensive than the switch itself.
If i put 4 original transceivers for sfp+ mmf in a 1930 24 Port Switch the Transceivers cost more than 4 times what the switch costs.

If I compare it to Ubiquiti Unifi, their Transceivers cost about the same like a 3rd Party Transceiver for Aruba.
That's the problem when the same Transceivers are used that are sold for the Enterprise Stuff.

I will get a bunch of 1930 Switches this week and will try it with difference configurations of FlexOptix Transceivers and Report which configurations are working.

------------------------------
Bjoern Ebner
------------------------------

Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

I use 2 of this part:
amazon.de HPE-kompatibel-J9150A-Transceiver-10GBase-SR-300-meter

They work flawless on my 1930

I´m located in Europe, hope you can get it in your local store

Regards,

------------------------------
heimo fuchs
------------------------------

Original Message:
Sent: 04-20-2021 06:05 AM
From: Bjoern Ebner
Subject: 1930 Models SFP+ compatibility

Is there any listing of working 3rd Party Transceivers or can anyone recommend a working SFP+ or SFP Transceiver? (MMF and SMF)
The price of the switches is just right, but I can't tell a customer to buy a transceiver which is more expensive than the switch itself.
If i put 4 original transceivers for sfp+ mmf in a 1930 24 Port Switch the Transceivers cost more than 4 times what the switch costs.

If I compare it to Ubiquiti Unifi, their Transceivers cost about the same like a 3rd Party Transceiver for Aruba.
That's the problem when the same Transceivers are used that are sold for the Enterprise Stuff.

I will get a bunch of 1930 Switches this week and will try it with difference configurations of FlexOptix Transceivers and Report which configurations are working.

------------------------------
Bjoern Ebner

Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

It shouldn't be a problem to get one of these.
I'm also located in Germany like you. :)

I will keep you all posted if the Flexoptix Ones work.
Maybe other can also share which SFP-Modules they have working :)

------------------------------
Bjoern Ebner
------------------------------

Original Message:
Sent: 04-20-2021 09:24 AM
From: heimo fuchs
Subject: 1930 Models SFP+ compatibility

I use 2 of this part:
amazon.de HPE-kompatibel-J9150A-Transceiver-10GBase-SR-300-meter

They work flawless on my 1930

I´m located in Europe, hope you can get it in your local store

Regards,

------------------------------
heimo fuchs

Original Message:
Sent: 04-20-2021 06:05 AM
From: Bjoern Ebner
Subject: 1930 Models SFP+ compatibility

Is there any listing of working 3rd Party Transceivers or can anyone recommend a working SFP+ or SFP Transceiver? (MMF and SMF)
The price of the switches is just right, but I can't tell a customer to buy a transceiver which is more expensive than the switch itself.
If i put 4 original transceivers for sfp+ mmf in a 1930 24 Port Switch the Transceivers cost more than 4 times what the switch costs.

If I compare it to Ubiquiti Unifi, their Transceivers cost about the same like a 3rd Party Transceiver for Aruba.
That's the problem when the same Transceivers are used that are sold for the Enterprise Stuff.

I will get a bunch of 1930 Switches this week and will try it with difference configurations of FlexOptix Transceivers and Report which configurations are working.

------------------------------
Bjoern Ebner

Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

I just tested some Flexoptix (SFP+ SR) Modules in my 1930-24G-PoE+ Switch.
I configured the Modules to the following configuration:

J9150D and J4858C

With the configuration J9150D I got an 10GBit Link
With the configuration J4858C I got an 1GBit Link

Everything seems to work as expected with the Flexoptix Modules.

For anyone that is interested:

https://www.flexoptix.net/en/

Their Modules and Cables can be bought preconfigured to a certain module or can be configured with a FlexBox (Which is quite expensive)

------------------------------
Bjoern Ebner
------------------------------

Original Message:
Sent: 04-20-2021 11:41 AM
From: Bjoern Ebner
Subject: 1930 Models SFP+ compatibility

It shouldn't be a problem to get one of these.
I'm also located in Germany like you. :)

I will keep you all posted if the Flexoptix Ones work.
Maybe other can also share which SFP-Modules they have working :)

------------------------------
Bjoern Ebner

Original Message:
Sent: 04-20-2021 09:24 AM
From: heimo fuchs
Subject: 1930 Models SFP+ compatibility

I use 2 of this part:
amazon.de HPE-kompatibel-J9150A-Transceiver-10GBase-SR-300-meter

They work flawless on my 1930

I´m located in Europe, hope you can get it in your local store

Regards,

------------------------------
heimo fuchs

Original Message:
Sent: 04-20-2021 06:05 AM
From: Bjoern Ebner
Subject: 1930 Models SFP+ compatibility

Is there any listing of working 3rd Party Transceivers or can anyone recommend a working SFP+ or SFP Transceiver? (MMF and SMF)
The price of the switches is just right, but I can't tell a customer to buy a transceiver which is more expensive than the switch itself.
If i put 4 original transceivers for sfp+ mmf in a 1930 24 Port Switch the Transceivers cost more than 4 times what the switch costs.

If I compare it to Ubiquiti Unifi, their Transceivers cost about the same like a 3rd Party Transceiver for Aruba.
That's the problem when the same Transceivers are used that are sold for the Enterprise Stuff.

I will get a bunch of 1930 Switches this week and will try it with difference configurations of FlexOptix Transceivers and Report which configurations are working.

------------------------------
Bjoern Ebner

Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

Does anyone know what 3rd party 10g-BaseT transceivers work with the 1930 switches? I'm gearing up to replace my home's core switch (an Unifi 48 port POE) with a 24 port 1930 POE. I've got an R730 with 10G BaseT NICs that are currently plugged into 10Gtek transceivers on the UniFi switch.
Original Message:
Sent: 04-20-2021 12:58 PM
From: Bjoern Ebner
Subject: 1930 Models SFP+ compatibility

I just tested some Flexoptix (SFP+ SR) Modules in my 1930-24G-PoE+ Switch.
I configured the Modules to the following configuration:

J9150D and J4858C

With the configuration J9150D I got an 10GBit Link
With the configuration J4858C I got an 1GBit Link

Everything seems to work as expected with the Flexoptix Modules.

For anyone that is interested:

https://www.flexoptix.net/en/

Their Modules and Cables can be bought preconfigured to a certain module or can be configured with a FlexBox (Which is quite expensive)

------------------------------
Bjoern Ebner

Original Message:
Sent: 04-20-2021 11:41 AM
From: Bjoern Ebner
Subject: 1930 Models SFP+ compatibility

It shouldn't be a problem to get one of these.
I'm also located in Germany like you. :)

I will keep you all posted if the Flexoptix Ones work.
Maybe other can also share which SFP-Modules they have working :)

------------------------------
Bjoern Ebner

Original Message:
Sent: 04-20-2021 09:24 AM
From: heimo fuchs
Subject: 1930 Models SFP+ compatibility

I use 2 of this part:
amazon.de HPE-kompatibel-J9150A-Transceiver-10GBase-SR-300-meter

They work flawless on my 1930

I´m located in Europe, hope you can get it in your local store

Regards,

------------------------------
heimo fuchs

Original Message:
Sent: 04-20-2021 06:05 AM
From: Bjoern Ebner
Subject: 1930 Models SFP+ compatibility

Is there any listing of working 3rd Party Transceivers or can anyone recommend a working SFP+ or SFP Transceiver? (MMF and SMF)
The price of the switches is just right, but I can't tell a customer to buy a transceiver which is more expensive than the switch itself.
If i put 4 original transceivers for sfp+ mmf in a 1930 24 Port Switch the Transceivers cost more than 4 times what the switch costs.

If I compare it to Ubiquiti Unifi, their Transceivers cost about the same like a 3rd Party Transceiver for Aruba.
That's the problem when the same Transceivers are used that are sold for the Enterprise Stuff.

I will get a bunch of 1930 Switches this week and will try it with difference configurations of FlexOptix Transceivers and Report which configurations are working.

------------------------------
Bjoern Ebner

Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------

I am using Fiber Store SFP-10GSR-85 (10G: SFP+ 850mm 300m) with my 1930 switch and also connected to my Fiber Store 3900-24P and my Juniper EX2200-C, all work just fine.  I also test with my UBNT ES-8-150w and worked as well.

------------------------------
Michael Ellis
------------------------------

Original Message:
Sent: 04-30-2021 10:02 AM
From: Unknown User
Subject: 1930 Models SFP+ compatibility

Does anyone know what 3rd party 10g-BaseT transceivers work with the 1930 switches? I'm gearing up to replace my home's core switch (an Unifi 48 port POE) with a 24 port 1930 POE. I've got an R730 with 10G BaseT NICs that are currently plugged into 10Gtek transceivers on the UniFi switch.
Original Message:
Sent: 04-20-2021 12:58 PM
From: Bjoern Ebner
Subject: 1930 Models SFP+ compatibility

I just tested some Flexoptix (SFP+ SR) Modules in my 1930-24G-PoE+ Switch.
I configured the Modules to the following configuration:

J9150D and J4858C

With the configuration J9150D I got an 10GBit Link
With the configuration J4858C I got an 1GBit Link

Everything seems to work as expected with the Flexoptix Modules.

For anyone that is interested:

https://www.flexoptix.net/en/

Their Modules and Cables can be bought preconfigured to a certain module or can be configured with a FlexBox (Which is quite expensive)

------------------------------
Bjoern Ebner

Original Message:
Sent: 04-20-2021 11:41 AM
From: Bjoern Ebner
Subject: 1930 Models SFP+ compatibility

It shouldn't be a problem to get one of these.
I'm also located in Germany like you. :)

I will keep you all posted if the Flexoptix Ones work.
Maybe other can also share which SFP-Modules they have working :)

------------------------------
Bjoern Ebner

Original Message:
Sent: 04-20-2021 09:24 AM
From: heimo fuchs
Subject: 1930 Models SFP+ compatibility

I use 2 of this part:
amazon.de HPE-kompatibel-J9150A-Transceiver-10GBase-SR-300-meter

They work flawless on my 1930

I´m located in Europe, hope you can get it in your local store

Regards,

------------------------------
heimo fuchs

Original Message:
Sent: 04-20-2021 06:05 AM
From: Bjoern Ebner
Subject: 1930 Models SFP+ compatibility

Is there any listing of working 3rd Party Transceivers or can anyone recommend a working SFP+ or SFP Transceiver? (MMF and SMF)
The price of the switches is just right, but I can't tell a customer to buy a transceiver which is more expensive than the switch itself.
If i put 4 original transceivers for sfp+ mmf in a 1930 24 Port Switch the Transceivers cost more than 4 times what the switch costs.

If I compare it to Ubiquiti Unifi, their Transceivers cost about the same like a 3rd Party Transceiver for Aruba.
That's the problem when the same Transceivers are used that are sold for the Enterprise Stuff.

I will get a bunch of 1930 Switches this week and will try it with difference configurations of FlexOptix Transceivers and Report which configurations are working.

------------------------------
Bjoern Ebner

Original Message:
Sent: 11-05-2020 12:18 PM
From: Niclas Prehm
Subject: 1930 Models SFP+ compatibility

Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

Do the devices support j9150A and or j9150D GBIC's?

------------------------------
regards, Niclas Prehm
------------------------------