Instant On - Wired

 View Only

  • 1.  Multiple Vlan tagged and untagged port different than vlan1 on 1930

    Posted 11-18-2020 04:14 AM
    I have the problem with cloud managed instant on 1930.

    I have a separate port on router untagged and tagged for client access different subnet and network than LAN / Voip port.

    1 have found only this settings:
    - All vlans tagged with 1 untagged,
    - All vlans tagged including vlan 1
    - or single vlan untagged...

    I need to set untagged to a     differ VLAN and still enable the VLAN for guest access because the switch will serve private LAN, Voip VLAN, Separate Guest and Guest VLAN..... is it possible ?

    I would like to keep cloud management, but I think  need to swith to local management.

    Could we ask for a feature request?
    Thanks for any suggestions

    ------------------------------
    Emanuele Fabris
    ------------------------------


  • 2.  RE: Multiple Vlan tagged and untagged port different than vlan1 on 1930

    Employee
    Posted 11-18-2020 10:56 AM
    Emanuele today with the 1930 this is only possible through local management, when and if new features become available you will receive them through firmware upgrades.

    ------------------------------
    Greg Thiesen
    ------------------------------

    Original Message


  • 3.  RE: Multiple Vlan tagged and untagged port different than vlan1 on 1930

    Posted 01-20-2021 11:48 AM
    Greg, Has this feature been added?  I have a similar situation and would like to know if i should just skip the cloud management?

    ------------------------------
    Chris Euler
    ------------------------------

    Original Message


  • 4.  RE: Multiple Vlan tagged and untagged port different than vlan1 on 1930

    Employee
    Posted 01-20-2021 12:15 PM
    Chris this is still only possible via local management.

    ------------------------------
    Greg Thiesen
    ------------------------------

    Original Message