Instant On - Wireless

Expand all | Collapse all

AP11D WAN Throughput

  • 1.  AP11D WAN Throughput

    Posted 07-12-2020 12:21 PM
    I’m having trouble finding specs on the WAN throughput of the AP11D when used as Routing device. Any idea what kind of ISP link it can handle? I would assume it is only intended for a Small Office Cable Modem / DSL link.


  • 2.  RE: AP11D WAN Throughput

    Posted 07-13-2020 12:00 PM

    @twhiteOXEN On AP as a Router, you should be directly connected to an ISP modem, which in most countries has a maximum throughput that is typically much less than what our AP product line is capable of delivering (E0 - gigabit ethernet). Therefore, in practice, the performance hit of being a Router should not have much of an impact on the overall user experience.



  • 3.  RE: AP11D WAN Throughput

    Posted 07-13-2020 01:36 PM

    Thanks @GThiesen. Yes that is the use case I'm wanting to prep for. For example most of our clients are using between a 200Mbps to 600Mbps connection. In a typical small office setting with 20 or fewer connected clients would the AP11D be able to handle a WAN 600Mbps connection? There would likely be an additional AP12 or AP15 connected downstream of the AP11D and a 1930 or 2530 switch for wired connections but again not more than 20 total client devices.



  • 4.  RE: AP11D WAN Throughput

    Posted 07-14-2020 11:48 AM

    @twhiteOXEN The AP11D again should handle this based on the information you have provided.

    Here is a deployment guide for future reference.

    https://www.arubainstanton.com/files/Aruba_Instant_On_Deployment_Guide.pdf



  • 5.  RE: AP11D WAN Throughput

    Posted 07-14-2020 12:05 PM
    Awesome! Thank you for your help @GThiesen!


  • 6.  RE: AP11D WAN Throughput

    Posted 07-22-2020 08:18 AM

    Thanks for the deployment guide. If I understand it right your ISP must provide an IP WAN address. There's no way to set a static IP for WAN on AP11D? So this isn't the solution for SOHO for static IP.



  • 7.  RE: AP11D WAN Throughput

    Posted 47 minutes ago
    Edited by Tom Sadlowski 46 minutes ago
    Hello @Greg Thiesen  - The deployment guide that you referenced below failed to offer specifics.  I am seeking to know specifically IMIX Traffic and iPerf3 Traffic throughput in Mbps for L3 Forwarding, Firewall, and IPsec VPN in the Aruba Instant On AP11D; or at minimum, capacity of using routing within the AP11D, relative to your other Aruba offerings, listed here:
    https://www.arubanetworks.com/products/networking/gateways-and-controllers/7000-series/

    There is nothing posted on Aruba Instant On of what is technically possible with the routing platform on any of the datasheets or in the support help center, resources, or forum.

    Additionally, am I correct in that only the AP's have routing functionality? Is an AP able to be a "router" connected to a switch which is connected directly to a cable modem in SOHO environments? (I imagine technically not.) Is there any other AP other than the AP11D with a LAN port, or a simple non-AP router to be released?

    Can the wireless be turned off on the AP11D so that it functions solely as router?

    Is Aruba Instant On equipment able to be paired with regular Aruba Cloud Gateways? Is extended supported for a fee a possibility?

    Thank you,
    Tom