Everything Instant On

Expand all | Collapse all

Adding additional AP to site remotely

  • 1.  Adding additional AP to site remotely

    Posted 07-29-2020 01:26 PM

    Hi All,

    I'm looking to add a new AP17 to a site so adding it to the portal must be done remotely.

    Site already has 1x AP12.

    How do I add additional AP so its configured and I cab ship direct to customer to plug in at his end?

    Thanks



  • 2.  RE: Adding additional AP to site remotely

    Posted 07-29-2020 02:08 PM
    Not positive if this will work but you can try this. Make sure the AP is ready to be added, login to the site you want to manage, add the AP by serial number. Worth a try.


  • 3.  RE: Adding additional AP to site remotely

    Posted 07-31-2020 11:27 AM

    @jmenic If you want to ship it and have the customer just plug it in you will need to configure the AP at your site first then ship it out. If this is not an option then you will need to have the customer mount and install and then you will need to go through the add device wizard.

    Here is the installation guide for the AP17.

    https://community.arubainstanton.com/t5/AP17-Support/Aruba-AP17-Installation-Guide/ta-p/343/jump-to/first-unread-message