Instant On - Wired

Expand all | Collapse all

DAC Error

  • 1.  DAC Error

    Posted 08-16-2020 04:33 PM

    When I insert my Tripplite 1M DAC, the switch throws an error.  I known in other Aruba products you can surpress DAC compatiblity warnings. How is this accomplished on this switch line?  I rather reserve the warning signals for things that actually matter to me.



  • 2.  RE: DAC Error

    Posted 08-17-2020 12:26 PM

    @CaptainPlanet The 1930 switch will support 3rd party optics, but has no way to turn off alerts for those optics.



  • 3.  RE: DAC Error

    Posted 10-01-2020 05:00 AM

    Hello,

    I got Cisco DAC Cable working, its listed as not supported in my Log.

    Any chances to overwrite the error, as the switch blinks continously red?

     

    Cheers



  • 4.  RE: DAC Error

    Posted 10-01-2020 10:42 AM

    @Xeroxxx Unfortunately it's a 3rd party optic and can't be overwritten.



  • 5.  RE: DAC Error

    Posted 10-02-2020 12:38 PM

    So its intended if you use a 3rd Party DAC the switch continously blinks orange?

    Then I would like to do a feature request to acknowledge this warning/error without getting support for that.

     

    Thank you



  • 6.  RE: DAC Error

    Posted 10-14-2020 11:00 AM

    @Xeroxxx I had the same issue with a dac from my switch to my router. I ended up with two sfp+ transceivers from 10gtek. Cost $20 each so I could get an Intel comp one for the firewall and HPP/Aruba compatible one for the switch, then a short patch cable. Cost a little more but still not bad and has been working great.



  • 7.  RE: DAC Error

    Posted 11-02-2020 07:44 AM
    Thanks. I'll be doing the same.


  • 8.  RE: DAC Error

    Posted 06-28-2021 05:41 AM
    SO you mean the 10gtek DAC cables worked without any warning messages? Because in your next sentence you mentioned <<so I could get an Intel comp one for the firewall and HPP/Aruba compatible one>> so compatible one - which one? Also how long were they?

    Thank you 


    ------------------------------
    Jim tsoutsouras
    ------------------------------



  • 9.  RE: DAC Error

    Posted 14 days ago
    Dell, Cisco and fs.com SFP+ transceivers all work. The DAC cables the same except they will flash a red error light, just ignore it.  I don't think people will be paying $100 for a "HP" DAC when the switch is only twice that. HPE ARUBA are really losing their market. Nothing special about this 1930 tbh. Unfinished firmware and a community with 200 members is a joke.

    ------------------------------
    TerrenceT Tibbs
    ------------------------------