Instant On - Wired

Expand all | Collapse all

1930 Models SFP+ compatibility

Jump to Best Answer
  • 1.  1930 Models SFP+ compatibility

    Posted 11-05-2020 12:18 PM
    Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

    Do the devices support j9150A and or j9150D GBIC's?

    ------------------------------
    regards, Niclas Prehm
    ------------------------------


  • 2.  RE: 1930 Models SFP+ compatibility
    Best Answer

    Posted 11-05-2020 02:22 PM
    Niclas The J9150D is the supported transceiver and the datasheet lists the supported transceiver options. The J9150A might work but is not guaranteed.
    https://www.arubainstanton.com/files/DS_AIO_1930SwitchSeries.pdf


    ------------------------------
    Greg Thiesen
    ------------------------------



  • 3.  RE: 1930 Models SFP+ compatibility

    Posted 11-10-2020 03:19 PM
    I was reading through that and I didn't see any reference to BiDi transceivers. Is there any guidance on that?


  • 4.  RE: 1930 Models SFP+ compatibility

    Posted 11-10-2020 03:39 PM
    BiDi transceivers are not supported on the 1930 switches.

    ------------------------------
    Greg Thiesen
    ------------------------------



  • 5.  RE: 1930 Models SFP+ compatibility

    Posted 11-10-2020 07:16 PM
    Thanks.


  • 6.  RE: 1930 Models SFP+ compatibility

    Posted 11-11-2020 04:38 PM
    Thanks. J9150A compatible third party SFP's do not work...

    ------------------------------
    Niclas Prehm
    ------------------------------



  • 7.  RE: 1930 Models SFP+ compatibility

    Posted 11-17-2020 06:34 AM
    It's in the installation guide, not the configuration manual. FYI, I'm using J4859D transceivers manufactured by a third party and labeled as HPE-Aruba compatible in a 1930. B&H wanted $2000 for an HPE-brand transceiver that costs $50 on FS.COM. That seemed a bit rich.



  • 8.  RE: 1930 Models SFP+ compatibility

    Posted 22 days ago
    Is there any listing of working 3rd Party Transceivers or can anyone recommend a working SFP+ or SFP Transceiver? (MMF and SMF)
    The price of the switches is just right, but I can't tell a customer to buy a transceiver which is more expensive than the switch itself.
    If i put 4 original transceivers for sfp+ mmf in a 1930 24 Port Switch the Transceivers cost more than 4 times what the switch costs.

    If I compare it to Ubiquiti Unifi, their Transceivers cost about the same like a 3rd Party Transceiver for Aruba.
    That's the problem when the same Transceivers are used that are sold for the Enterprise Stuff.

    I will get a bunch of 1930 Switches this week and will try it with difference configurations of FlexOptix Transceivers and Report which configurations are working.

    ------------------------------
    Bjoern Ebner
    ------------------------------



  • 9.  RE: 1930 Models SFP+ compatibility

    Posted 22 days ago
    I use 2 of this part:
    amazon.de HPE-kompatibel-J9150A-Transceiver-10GBase-SR-300-meter

    They work flawless on my 1930

    I´m located in Europe, hope you can get it in your local store

    Regards,

    ------------------------------
    heimo fuchs
    ------------------------------



  • 10.  RE: 1930 Models SFP+ compatibility

    Posted 22 days ago

    It shouldn't be a problem to get one of these.
    I'm also located in Germany like you. :)

    I will keep you all posted if the Flexoptix Ones work.
    Maybe other can also share which SFP-Modules they have working :)



    ------------------------------
    Bjoern Ebner
    ------------------------------



  • 11.  RE: 1930 Models SFP+ compatibility

    Posted 22 days ago
    I just tested some Flexoptix (SFP+ SR) Modules in my 1930-24G-PoE+ Switch.
    I configured the Modules to the following configuration:

    J9150D and J4858C

    With the configuration J9150D I got an 10GBit Link
    With the configuration J4858C I got an 1GBit Link

    Everything seems to work as expected with the Flexoptix Modules.

    For anyone that is interested:

    https://www.flexoptix.net/en/

    Their Modules and Cables can be bought preconfigured to a certain module or can be configured with a FlexBox (Which is quite expensive)

    ------------------------------
    Bjoern Ebner
    ------------------------------



  • 12.  RE: 1930 Models SFP+ compatibility

    Posted 12 days ago
    Does anyone know what 3rd party 10g-BaseT transceivers work with the 1930 switches? I'm gearing up to replace my home's core switch (an Unifi 48 port POE) with a 24 port 1930 POE. I've got an R730 with 10G BaseT NICs that are currently plugged into 10Gtek transceivers on the UniFi switch.


  • 13.  RE: 1930 Models SFP+ compatibility

    Posted 11 days ago
    I am using Fiber Store SFP-10GSR-85 (10G: SFP+ 850mm 300m) with my 1930 switch and also connected to my Fiber Store 3900-24P and my Juniper EX2200-C, all work just fine.  I also test with my UBNT ES-8-150w and worked as well.

    ------------------------------
    Michael Ellis
    ------------------------------