Instant On - Wired

Expand all | Collapse all

1930 Models SFP+ compatibility

Jump to Best Answer
  • 1.  1930 Models SFP+ compatibility

    Posted 19 days ago
    Is there any valid documentation which HPE/Aruba SFP+ Modules are supported by the 1930 Models?

    Do the devices support j9150A and or j9150D GBIC's?

    ------------------------------
    regards, Niclas Prehm
    ------------------------------


  • 2.  RE: 1930 Models SFP+ compatibility
    Best Answer

    Posted 19 days ago
    Niclas The J9150D is the supported transceiver and the datasheet lists the supported transceiver options. The J9150A might work but is not guaranteed.
    https://www.arubainstanton.com/files/DS_AIO_1930SwitchSeries.pdf


    ------------------------------
    Greg Thiesen
    ------------------------------



  • 3.  RE: 1930 Models SFP+ compatibility

    Posted 14 days ago
    I was reading through that and I didn't see any reference to BiDi transceivers. Is there any guidance on that?


  • 4.  RE: 1930 Models SFP+ compatibility

    Posted 14 days ago
    BiDi transceivers are not supported on the 1930 switches.

    ------------------------------
    Greg Thiesen
    ------------------------------



  • 5.  RE: 1930 Models SFP+ compatibility

    Posted 14 days ago
    Thanks.


  • 6.  RE: 1930 Models SFP+ compatibility

    Posted 13 days ago
    Thanks. J9150A compatible third party SFP's do not work...

    ------------------------------
    Niclas Prehm
    ------------------------------



  • 7.  RE: 1930 Models SFP+ compatibility

    Posted 7 days ago
    It's in the installation guide, not the configuration manual. FYI, I'm using J4859D transceivers manufactured by a third party and labeled as HPE-Aruba compatible in a 1930. B&H wanted $2000 for an HPE-brand transceiver that costs $50 on FS.COM. That seemed a bit rich.