Instant On - Wired

 View Only

  • 1.  Aruba 6000 and 1930

    Posted 08-22-2022 02:06 PM
    Hi Everyone,

    I have the following structure and was wondering, if it is possible  to make them work together on different VLANs 

    Different vendor core switch( trunk port)===> all VLANs 
    connected to 
    Aruba 1930 switch  ===> vlan x, y,z 
    connected to
    Aruba 6000 switch ===> vlan x

    1. What configs should be on the port from Aruba to other vendor's switches? Should it be trunk or access as trunk didn't work with me for unknown reason.
    2. Should I set the port between the two Aruba to be trunk or leave it as access to vlan x?
    3. On the middle switch, can I set ports on different VLANs as I tried that but didn't work with me not sure why!

    thanks in advance for your support

    ------------------------------
    sam Anderson
    ------------------------------


  • 2.  RE: Aruba 6000 and 1930

    Employee
    Posted 08-24-2022 07:38 PM
    I shared this with my team. Once I have a concrete answer, I'll let you know.

    ------------------------------
    Aruba Instant On Communications
    ------------------------------

    Original Message


  • 3.  RE: Aruba 6000 and 1930

    Employee
    Posted 08-30-2022 02:08 PM
    Hey Sam,

    My support team would like for you to contact them directly. https://www.arubainstanton.com/contact-support/

    ------------------------------
    Aruba Instant On Communications
    ------------------------------

    Original Message