Instant On - Wired

 View Only

  • 1.  Aruba Instant On 1930 8G 2SFP Switch JL680A

    Posted 11-28-2022 07:49 AM
    I have an router without ability to use vlan tagging. So i use 1930 before it to connect to pppoe. Aruba's firmware was 1.0. All worked fine. Then i updated firmware idk why to the latest 2.7.0 and all broked. Any manipulations dont give any positive results. How to fix it? Is there any variant to rollback using jtag or anything else?

    ------------------------------
    al ex
    ------------------------------


  • 2.  RE: Aruba Instant On 1930 8G 2SFP Switch JL680A

    Employee
    Posted 11-29-2022 04:03 PM
    Hey,

    Can you provide us with more information on the configuration of the switch (before and after the upgrade) and network topology? This will help us to provide a solution.  

    ------------------------------
    Aruba Instant On Communications
    ------------------------------

    Original Message


  • 3.  RE: Aruba Instant On 1930 8G 2SFP Switch JL680A

    Posted 11-29-2022 08:40 PM
    1, 2, 3 ports are local devices. port 4 - fiber via pppoe (vlan tagging is requested), port 5 connected to wan port of a router - pppoe dialer. I tried to tag port 4 and 5 to "1,848" using 1.0.5 firmware and it worked. After an update it stopped to work. I tried different combinations - no result

    ------------------------------
    al ex
    ------------------------------

    Original Message


  • 4.  RE: Aruba Instant On 1930 8G 2SFP Switch JL680A

    Posted 11-30-2022 07:43 PM
    Finally. I resetted config and it didnt help after configuration, then i resetted again, then rolled back to 2.6 and it didnt help after configuration, then i restored 2.7 again and whoaa it helped. What the glitched gremlin was that idk.

    ------------------------------
    al ex
    ------------------------------

    Original Message