Everything Instant On

Instant AP can be factory defaulted by the following ways:

Hard Reset on the AP:

The Reset button on the Instant ON AP can be used to Factory Default the Instant ON AP.

Reset button is placed inside a small hole present on the back of the AP .

To reset the AP:

• Press and hold the reset button using a small, narrow object, such as a paper clip.
• Power OFF the AP.
• Power ON the AP while holding the reset button using paper clip. Within 5 seconds, the power LED flashes.
• Release the reset button.

The power LED flashes again within 15 seconds, which indicates that the reset is completed.The AP boots with the factory default settings.Then, the device can be moved to another site.

Reset APs via Mobile APP/WebUI

Removing device from the Device Inventory of the site will factory default the Instant AP.

In Mobile App

Click on Devices->Inventory -> More actions of the top right corner -> Remove from inventory

In WebUI

Devices-> Click on the device that needs to be factory defaulted -> Settings icon -> Remove from inventory

Instant AP can be factory defaulted by the following ways:

Hard Reset on the AP:

The Reset button on the Instant ON AP can be used to Factory Default the Instant ON AP.

Reset button is placed inside a small hole present on the back of the AP .

To reset the AP:

• Press and hold the reset button using a small, narrow object, such as a paper clip.
• Power OFF the AP.
• Power ON the AP while holding the reset button using paper clip. Within 5 seconds, the power LED flashes.
• Release the reset button.

The power LED flashes again within 15 seconds, which indicates that the reset is completed.The AP boots with the factory default settings.Then, the device can be moved to another site.

Reset APs via Mobile APP/WebUI

Removing device from the Device Inventory of the site will factory default the Instant AP.

In Mobile App

Click on Devices->Inventory -> More actions of the top right corner -> Remove from inventory

In WebUI

Devices-> Click on the device that needs to be factory defaulted -> Settings icon -> Remove from inventory

Hi
It is necessary to change the connection type for the access point, there is no such parameter anywhere, I wanted to delete it according to the instructions in order to select the desired connection type again, but there is no deletion point

@SWAATHI

------------------------------
BORT BORT

Original Message:
Sent: 12-12-2019 04:55 PM
From: SWAATHI
Subject: How to reset an Instant ON AP to factory default settings?

Instant AP can be factory defaulted by the following ways:

Hard Reset on the AP:

The Reset button on the Instant ON AP can be used to Factory Default the Instant ON AP.

Reset button is placed inside a small hole present on the back of the AP .

To reset the AP:

• Press and hold the reset button using a small, narrow object, such as a paper clip.
• Power OFF the AP.
• Power ON the AP while holding the reset button using paper clip. Within 5 seconds, the power LED flashes.
• Release the reset button.

The power LED flashes again within 15 seconds, which indicates that the reset is completed.The AP boots with the factory default settings.Then, the device can be moved to another site.

Reset APs via Mobile APP/WebUI

Removing device from the Device Inventory of the site will factory default the Instant AP.

In Mobile App

Click on Devices->Inventory -> More actions of the top right corner -> Remove from inventory

In WebUI

Devices-> Click on the device that needs to be factory defaulted -> Settings icon -> Remove from inventory

#reset
#ArubaInstantOn
#factorydefault

Hi
It is necessary to change the connection type for the access point, there is no such parameter anywhere, I wanted to delete it according to the instructions in order to select the desired connection type again, but there is no deletion point

@SWAATHI

Instant AP can be factory defaulted by the following ways:

Hard Reset on the AP:

The Reset button on the Instant ON AP can be used to Factory Default the Instant ON AP.

Reset button is placed inside a small hole present on the back of the AP .

To reset the AP:

• Press and hold the reset button using a small, narrow object, such as a paper clip.
• Power OFF the AP.
• Power ON the AP while holding the reset button using paper clip. Within 5 seconds, the power LED flashes.
• Release the reset button.

The power LED flashes again within 15 seconds, which indicates that the reset is completed.The AP boots with the factory default settings.Then, the device can be moved to another site.

Reset APs via Mobile APP/WebUI

Removing device from the Device Inventory of the site will factory default the Instant AP.

In Mobile App

Click on Devices->Inventory -> More actions of the top right corner -> Remove from inventory

In WebUI

Devices-> Click on the device that needs to be factory defaulted -> Settings icon -> Remove from inventory