Instant On - Wired

Hello,

We recently moved to Aruba for our core switches. We have a 48-port 1960 and purchased two R0R41B 10GB SPF+ modules for the two expansion ports on our switch. Regardless of which module in which port, we snap it in and both the port and the health LED start flashing yellow. If we eject the module, everything goes back to green. In the web interface, the port shows a status of down when the module is plugged in. Based on what I've read, it should "just work" and I don't see anything in the interface or manual indicating any configuration is needed unless you want to change the interface port speed. I feel like I'm missing something. Any guidance is much appreciated.

M. 

Hi Mark,

This might help- it lists Aruba compatible sfp+ transceivers'

https://community.arubainstanton.com/blogs/gregory-weaver1/2022/10/14/aruba-instant-on-transceiver-guide 

Thanks,

Travis 

Hello,

We recently moved to Aruba for our core switches. We have a 48-port 1960 and purchased two R0R41B 10GB SPF+ modules for the two expansion ports on our switch. Regardless of which module in which port, we snap it in and both the port and the health LED start flashing yellow. If we eject the module, everything goes back to green. In the web interface, the port shows a status of down when the module is plugged in. Based on what I've read, it should "just work" and I don't see anything in the interface or manual indicating any configuration is needed unless you want to change the interface port speed. I feel like I'm missing something. Any guidance is much appreciated.

M. 

Hello,

We recently moved to Aruba for our core switches. We have a 48-port 1960 and purchased two R0R41B 10GB SPF+ modules for the two expansion ports on our switch. Regardless of which module in which port, we snap it in and both the port and the health LED start flashing yellow. If we eject the module, everything goes back to green. In the web interface, the port shows a status of down when the module is plugged in. Based on what I've read, it should "just work" and I don't see anything in the interface or manual indicating any configuration is needed unless you want to change the interface port speed. I feel like I'm missing something. Any guidance is much appreciated.

M.