HI JM52,
Thank you for this setup... But, how can you then integrate the switch for management through the cloud ?
I have tested this configuration, but as soon as the default vlan is changed, the switch can no longer be integrated into the Cloud...
Thank you for your help,
BR
------------------------------
Nicolas Borowy
------------------------------
Original Message:
Sent: 07-19-2022 04:31 PM
From: Jessica Mitchell
Subject: Procedure to change the Management VLAN of Aruba 1960 ?
Hey Lone,
Please look at the configuration guide.
https://www.arubanetworks.com/techdocs/InstantOn_1960_Switch/mcg_1960.pdf
Chapter 4 setup network -> Management VLAN settings, basically add a VLAN and change that as management VLAN when the switch is managed locally.
------------------------------
Aruba Instant On Communications
Original Message:
Sent: 07-14-2022 02:46 AM
From: Lone Lee
Subject: Procedure to change the Management VLAN of Aruba 1960 ?
Hi,
What is the procedure Procedure to change the Management VLAN of Aruba 1960?
I had tried by two way:
Way1(DHCP):
1. create new vlan 2 then assign port1 untag and save config
2. change the Management VLAN to 2 and apply.
3. didn't get ip from dhcp server
Way2(static ip)
1. create new vlan 2 then assign port1 untag.
2. set static ip and save.
3. change the Management VLAN to 2 and apply.
4. can't ping the static ip.
Any one can tell me what's the procedure to change the Management VLAN?
Lone
------------------------------
Lone Lee
------------------------------