Hi,What is the procedure Procedure to change the Management VLAN of Aruba 1960?I had tried by two way:
1. create new vlan 2 then assign port1 untag and save config2. change the Management VLAN to 2 and apply.3. didn't get ip from dhcp server
Way2(static ip)1. create new vlan 2 then assign port1 untag.2. set static ip and save.3. change the Management VLAN to 2 and apply.4. can't ping the static ip.Any one can tell me what's the procedure to change the Management VLAN?Lone
Hey Lone,Please look at the configuration guide.
Chapter 4 setup network -> Management VLAN settings, basically add a VLAN and change that as management VLAN when the switch is managed locally.
Hi JM52,Thank your reply.As Alex Hung reply, I must set not only untag VLAN but also PVID.After setting the untag VLAN and PVID, It's OK.BR.,Lone