Original Message:
Sent: 8/13/2024 10:37:00 AM
From: gorazd
Subject: RE: S0G18A modules show as non-compliant in logs despite being listed as compatible
If your switch is not on the latest FW release I would suggest upgrade first. New SFPs get supported with new FW releases.
------------------------------
Gorazd Kikelj
------------------------------
Original Message:
Sent: 08-12-2024 04:11 PM
From: KMCAdmin
Subject: S0G18A modules show as non-compliant in logs despite being listed as compatible
Hello,
We recently purchased two S0G18A 10GBT modules new for our 1960's series Instant On switch. Per the documentation below, these modules are listed as being compatible in multiple sources. However, when I slot them into the SFP+ ports, they blink orange and show as "1/51 - non-compliant SFP inserted" in the diagnostics logs. Is there anything configuration-wise I can do either via GUI or command-line to get them properly recognized?
The informational brochure (P14) - https://www.arubainstanton.com/files/DS_AIO_1960SwitchSeries.pdf
The HPE Networking Instant On Transceiver Guide (P17)
This community blog post from May of this year: https://community.arubainstanton.com/blogs/so93/2024/05/24/new-ways-to-connect-your-hpe-networking-instant-on
Thanks for any possible help,
Mark
------------------------------
MArk Andrich
------------------------------