Adding additional AP to site remotely

New Member

Adding additional AP to site remotely

Hi All,

I'm looking to add a new AP17 to a site so adding it to the portal must be done remotely.

Site already has 1x AP12.

How do I add additional AP so its configured and I cab ship direct to customer to plug in at his end?

Thanks

0 Kudos
2 Replies
Highlighted
Occasional Contributor II

Re: Adding additional AP to site remotely

Not positive if this will work but you can try this. Make sure the AP is ready to be added, login to the site you want to manage, add the AP by serial number. Worth a try.
0 Kudos
Highlighted
Employee
Employee

Re: Adding additional AP to site remotely

@jmenic If you want to ship it and have the customer just plug it in you will need to configure the AP at your site first then ship it out. If this is not an option then you will need to have the customer mount and install and then you will need to go through the add device wizard.

Here is the installation guide for the AP17.

https://community.arubainstanton.com/t5/AP17-Support/Aruba-AP17-Installation-Guide/ta-p/343/jump-to/...

0 Kudos