How to create a site in Router Mode in Aruba Instant On

Highlighted
Employee
Employee

How to create a site in Router Mode in Aruba Instant On

  • Router mode lets us create a Site with one AIO AP acting as a Router (Mesh Portal with Wi-Fi), while all the other APs are added as Mesh points.
  • In Router mode, it is not possible to add more than one AP using Ethernet cable while they can be added over the air.

Step 1 :

  • Click on “Setup a new Site”.
  • This option brings up the setup wizard to create a new Site.

 

1. New site.JPGSet up a new site

 

Step 2 :

  • It is mandatory to have at least one Network in a Site.
  • Create the Network and click on Continue.

 

2.New site.JPGSet up your network

 

Step 3 :

  • Here, we can choose the type of Site to be created.
  • By default, the first option is selected. Select the Second Option for Router mode.
  • Click on Continue.

 

3.New site.JPGSet up your connectivity

 

Step 4 :

  • Here, we get a prompt to make sure an Instant On AP is connected to the LAN network and it gets an IP address from the DHCP server.
  • Once we confirmed that the AP is physically connected to a LAN network, click on Continue.

 

4.New site.JPGPlug in

 

Step 5 :

  • Here, we need to confirm that the AP is ready to be added to the site.
  • The power light will light up in alternating green/amber when it is ready to be discovered.
  • Click on Continue.

 

5.New site.JPGStand by

 

Step 6 :

  • Enter the Serial number of the AP that we are trying to add to the site.
  • On the Aruba Instant On app, it will automatically scan the APs via Bluetooth.
  • If the scanning fails, it is possible to obtain the serial number through Barcode scanning.
  • Click on Search for devices.

 

6.New site.JPGAdd new devices

 

Step 7 :

  • Here, the Portal / AIO App identifies the AP in the cloud and displays the AP model and Serial number.
  • Select your AP and click on Add devices to add the AP.

 

7.New site.JPGAdd new devices

 

Step 8 :

  • This step is to set the Site Name and the Location of the AP.

 

8.New site.JPGSet your country

 

Step 9 :

  • We get a confirmation that Your site is ready!, Click on Continue.

 

9.New site.JPGYour site is ready!

  • Once clicking on Continue, the new Site gets created.
  • The site will have one active network and one active device.
  • Initially the AP will be in Synchronizing state, which will change to Active mode as soon as the config sync is complete.

 

1.Extend over wireless.JPGNetworks Tab

Site Created.JPGDashboard

 

 

Regards,
Krishna Prasad
Labels (1)