I'm new to the world of Aruba and am having some difficulty setting up my network to match the consumer-grade device I'm replacing. Looking at the documentation online, I should see a toggle under Inventory > Advanced that allows for setting a static IP, subnet, gateway and DNS server. All I see are Base IP address and subnet.
I am at least online (yay!) and somehow managed to set the IP of the AP11 to that of the WAP it replaced (192.168.1.1) , but want to set the DNS as that of my Pi Hole (192.168.1.5). I just don't see where/how. I don't recall seeing the option to set these when I initially set up the device.
The relevant portion from the manual and what I see are below.There is no toggle present on the Advanced tab.
Disreguard. I called tech support for help with ths and was told that since I purchased this via 3rd party (Amazon) there wasn't any support offered. So I'm returning both of the AP11s I purchased and buying from someone else.
Even the Netgear devices these were supposed to replace were given support when purchased elsewhere.
I have 3 AP11D setup in AP mode and the DNS option appears for me. Perhaps it matters which "Visibility and Control" setting is active? Mine is set to "Application activity summary" where it only shows bandwidth totals and does no content filtering, etc. If you have the content filtering "Application details (default)" enabled then I believe it needs to use Aruba's DNS partner to preform this function. I don't want to modify my system to check but it might be something you can try.