This community is currently in a read-only state due to a maintenance window. For more info click here

All APs limited to 90Mbps

Highlighted
Occasional Contributor II

Re: All APs limited to 90Mbps

For me I believe the issue is when you have 2 instant on switches that are both different model being managed by the cloud portal. To get back the full speed i had to change my 8 port switches to local mode only which then solved the issue for me.

My recommendation for people if you have 2 different models switch 1 of the models to local mode only if you want your full speed back. (at least thats what my further testing proves to me)

0 Kudos
Highlighted
Occasional Contributor II

Re: All APs limited to 90Mbps

I only have the one 24 port 1930.

I was able to reproduce it on the session with support last night.
It only affected my android clients not windows. It possibly affects ios but I don't have any ios devices to test with.
0 Kudos
Highlighted
Occasional Contributor I

Re: All APs limited to 90Mbps

Hi guys

I have a method for limiting 90Mbps Smiley Happy

I will give two examples for which the method worked:

Apple TV: connected via WiFi, run the test, e.g. Speedtest Ookla (there is an AppStore), in my case it was 90Mbps.

Power off the Apple TV and connect the wired to the switch (1930), run the test again, in my case it was 498/29 Mbps (I have 500/30 internet access). You need to do a dozen test (10-20). After that we disconnect the wired from the switch and Apple TV switches to WiFi.

We restart Speedtest and ..... I had 480/25Mbps Smiley Happy

I did the same with the iMac on which I also had a 90Mbps limit!

I turned off the WiFi connected to the switch 1930 via the wired. I did some speed tests and worked like this for about 1 hour (results - 500/30, 498/28, all ok). Later I disconnected the cable and turned on WiFi. And … I ran the test and the results were super 498/25,500/30 via WiFi without 90Mbps limit.

It's a bit funny but it has been working for two days, I have no limit on these devices. I still have a problem with the IPhone and IPad because I can't connect them via the wired Smiley Happy.

 

Test it may also work for you.

Regards Robert

0 Kudos
Highlighted
Occasional Contributor II

Re: All APs limited to 90Mbps

The Mac addresses on the ethernet controllers should be different. Wonder why that would do that. Mine was linked to other devices on the same subnet being negotiated at 100 mbps or 10 mbps.
0 Kudos
Highlighted
Occasional Contributor I

Re: All APs limited to 90Mbps

MAC and IP were different but I think ARUBA is using OS ID or Service ID to assign subnet. As is the case with AirGroup assignment in higher ARUBA systems.

0 Kudos
Highlighted
Occasional Contributor II

Re: All APs limited to 90Mbps

Hello;

Any timeline on when will this bug be ironed out as this is very impactful on the deployment and usage of these products.

 

0 Kudos
Highlighted
Employee
Employee

Re: All APs limited to 90Mbps

@Abdulaziz Support and engineering are working to resolve this.

Highlighted
Occasional Contributor II

Re: All APs limited to 90Mbps

I think this is at the switch. I didn't notice until now but it affects all my vmware servers. 

They are hardwired at the switch, both windows and Linux vm's affected exactly the same. Limited to 90mbps when anything with a 100mbps connection is negotiated at the switch on the same vlan. I've had to go as creating a new vlan for the 100mb devices to keep them away from the rest.

0 Kudos
Highlighted
Employee
Employee

Re: All APs limited to 90Mbps

@Donatom3 @NewNetwork @Abdulaziz @Robert69  We just released a new version of firmware for the AP's and switches please update and run some testing and let us know your results.

0 Kudos
Highlighted
Occasional Contributor II

Re: All APs limited to 90Mbps

@GThiesen thanks ran the update I will test it out later today.

0 Kudos