Is it possible to use multi-SSID and VLAN on AP11?

Highlighted
New Member

Is it possible to use multi-SSID and VLAN on AP11?

Is it possible to use multi-SSID with AP11?
Also, can I assign a VLAN for each SSID?

0 Kudos
4 Replies
Highlighted
Employee
Employee

Re: Is it possible to use multi-SSID and VLAN on AP11?

@uema All Instant ON AP's support up to 8 SSID's and the AP11 does not have the ability to have multiple VLAN's supported. The AP's support doing NAT.

0 Kudos
Highlighted
New Contributor

Re: Is it possible to use multi-SSID and VLAN on AP11?

Do any of the instant on AP's support multiple vlans? This is ciritcal for segregating untrustworthy IOT devices even on a home network.

0 Kudos
Highlighted
Employee
Employee

Re: Is it possible to use multi-SSID and VLAN on AP11?

@bleo 

You can set one VLAN for each SSID (or per Network).  I have such a setup where I put my IoT devices on their own VLAN and then set the Network Access to Restricted in the configuration, which isolates those devices from my other private networks.

Quite easy to setup too if you are using the 1930 Instant On switch.

 

0 Kudos
Highlighted
Occasional Contributor I

Re: Is it possible to use multi-SSID and VLAN on AP11?

You can use VLAN on AP11D

0 Kudos