i have two sitesA 4(ap11) in one and 6 in another SiteB (ap11 and ap12). In siteA 3 are cabled using Aruba POE switch and one is mesh using adaptor.Our internet plan is 280mbps.when its connecting instant on ap11 the speed is going down below 50mbps to kbps.same site they are using a linksys router its showing 250 to 280 mbps.These all devices are automatically synchronising using mesh.how its possible 3 are cabled so the uplink must be from the switch but ,here its showing another ap name and one ap is connected through mesh and that one is showing the uplink from SWITCH.Its wrong.two sites having the same problem.how we can sort out the issue.
@VishakPromise Who are you testing? Is your client connecting on 2.4GHz or 5GHz? If they are using the 2.4GHz your default channel width is only 20MHz which is limited on bandwidth. So please review your radio setting and if this still persists please reach out to support.