Uplink Management VLAN of AP cannot be changed after onboarding but can be done before onboarding.
Please refer to the section IP Assignment for Access Points on the user guide linked below.
https://higherlogicdownload.s3-external-1.amazonaws.com/AIO/14a38ed9-49a3-1262-018b-fedf0aec62c5_file.pdf?AWSAccessKeyId=AKIAVRDO7IEREB57R7MT&Expires=1652802629&Signature=Rouc%2F5IcCdNhxXKpkHGIRHrs6CI%3D
Even though the AP management VLAN cannot be changed from VLAN 1, we should be able to handle your deployment where AP will be in default VLAN and clients can be mapped to other VLAN. We recommend chatting with support so that we can help you better.
------------------------------
Aruba Instant On Communications
------------------------------
Original Message:
Sent: 04-28-2022 10:50 AM
From: Unknown User
Subject: Management VLAN
We really need an option to change the management VLAN
problem is we have created a management vlan 5 for example
the problem is if we use the instanton switch and instanton AP's they do not let you set that.
I need the option to set a management vlan of 5 so the AP's and Switches will use that instead of vlan 1 which everything else uses.
UBNT you can set the management vlan to what you want.
I have a mix environment for switches.
we have mostly Aruba procurve switches with a few instanton for different areas but when we plug an instanton AP into the aruba instanton it will never work because it is trying to use VLAN1 instead of VLAN5 and the switch will not let me change the untag/tag for that port port once an AP is plugged into it.