There is nothing in the admin/user guide saying you can login to management using RADIUS.
Is there a configuration guide on this on the requirements
Our switches are in Local mode.
We are required by some clients to have 2FA on these switches and we run with the 1930 & 1960's
There are NO IP restrictions either which would allow us to secure them. Since we can limit only hosts IP's with 2FA to access https.
@JM52 Where did you get your information from?
@Dark345 Can you share how you got this working since there is a lack of documentation?
------------------------------
Vaughn
------------------------------
Original Message:
Sent: 03-24-2022 09:14 PM
From: Jessica Mitchell
Subject: Aruba Instant On 1930 - Radius Management Authentication
That's great news! Thank you for updating us on this.
------------------------------
Aruba Instant On Communications
Original Message:
Sent: 03-23-2022 07:07 AM
From: Paolo Vasinton
Subject: Aruba Instant On 1930 - Radius Management Authentication
Hello, perfect, thanks, it's working now:
in Microsoft NPS use Auth method PAP, SPAP and Service-Type (others) administrative
------------------------------
Paolo Vasinton
Original Message:
Sent: 03-22-2022 07:44 PM
From: Jessica Mitchell
Subject: Aruba Instant On 1930 - Radius Management Authentication
Can you check to see if the RADIUS service attributes are configured?
These are the RADIUS attributes:
Service-Type=6 (Administrative) -- read/write access
Service-Type=7 (NAS prompt) --- read-only access
------------------------------
Aruba Instant On Communications
Original Message:
Sent: 03-12-2022 06:19 AM
From: Harrison Hydes
Subject: Aruba Instant On 1930 - Radius Management Authentication
After upgrading my aruba Instant On 1930 24G 4SFP/SFP+ Switch JL682A to version 2.5.0.42. I have enabled Radius Admin Authentication but am unable to get the login to succeed. Does anyone know the Radius Attributes required to authenticate
------------------------------
Harrison
------------------------------