I manage the stack using the Local Web GUI. I went to Maintenance - Backup and Update Files. I downloaded the image (to .bin file).
I then factory reset all of the switches.
When it didn't work, I don't recall if I tried to restore the .bin file in cloud mode, local web GUI mode, or both.
At this point, I would only want/need instructions on how to backup and restore the stack using the Local Web GUI - i.e. after the factory reset and entering into Local Web GUI mode: which switch(es) do I need to restore the settings to, at what point do I physically connect the switches together, do I need to setup the stack in the GUI before trying to restore the settings, etc.
------------------------------
David Lindenstruth
------------------------------
Original Message:
Sent: 05-03-2022 10:02 PM
From: Jessica Mitchell
Subject: Backup Stack Settings
My team did get back to me and they need more information. Is the 1960 stack managed via Local Web GUI or Cloud? Can you elaborate on how the backup was done?
------------------------------
Aruba Instant On Communications
Original Message:
Sent: 04-28-2022 09:50 AM
From: David Lindenstruth
Subject: Backup Stack Settings
I have 4 1960 switches stacked. When setting it up, I tried to backup the settings from the conductor, resetting the switches, and then restoring those settings. That did not work. I had to manually reconfigure all of the switches. I'm wondering what the correct process for backing up stack settings is. Tx!
------------------------------
David Lindenstruth
------------------------------