Instant On - Wired

 View Only

  • 1.  aruba 1930 instant on switch port blinking green

    Posted 12-07-2021 12:07 PM
    Good day everyone

    So I recently got Aruba 1930 Switches for my CCTV network, I configured the Switches and plugged in my POE cameras. Now the Switchport LEDs are Constantly flashing green every second simultaneously.

    Is this a normal behavior?

    :(

    ------------------------------
    Mkondo mkwebury
    ------------------------------


  • 2.  RE: aruba 1930 instant on switch port blinking green

    Posted 01-28-2022 07:17 PM
    We have a bunch of 1930s and though I haven't looked at them lately, I believe this is "normal".
    When there's activity on a port they blink green, but they blink slowly and seemingly in unison.  I'm used to the hyper, chaotic blinking of other switches.

    ------------------------------
    BMS
    ------------------------------

    Original Message


  • 3.  RE: aruba 1930 instant on switch port blinking green

    Posted 03-11-2022 02:35 AM
    No it's not normal behaviour, but it has been fixed in the newer firmware versions (1.0.7 and up)

    ------------------------------
    Walther Lalk
    ------------------------------

    Original Message


  • 4.  RE: aruba 1930 instant on switch port blinking green

    Posted 03-12-2022 08:15 PM
    Hi All,

    My 1930 8G PoE 2SFP 124W and 1930 8G 2SFP have both exhibited this behavior since I purchased them, even through a couple of firmware updates. They are both currently at version 2.5.0, and I have even setup the site from scratch (both were factory reset) recently after replacing my AP11D (previously in router mode, now AP mode) with a Firewalla Gold firewall in router mode.

    C

    ------------------------------
    Cory Cooper
    ------------------------------

    Original Message