Instant On - Wired

 View Only

  • 1.  Connecting 1930 to a Juniper ex3300 with multiple vlans

    Posted 02-17-2022 12:53 PM
    Hello everyone,

    I have aruba 1930 sw and I need to connect it to a juniper sw ex3300. I need to configure multiple vlans on both sw. On juniper side things are very clear. But I have been struggling with 1930 configuration. On 1930 I have some ports in vlan #2 and some ports in #3 (both are untagged). On the uplink (1930 side) I have both vlans tagged. One of the vlans is working while the other is not reachable. The configuration at the Juniper side as follows ( trunk port, member of both vlans).

    Any help with this is appreciated.

    Thanks a lot ​​

    ------------------------------
    Alaa Smarneh
    ------------------------------


  • 2.  RE: Connecting 1930 to a Juniper ex3300 with multiple vlans

    Employee
    Posted 02-18-2022 11:56 AM
    Hey Alaa,

    Thank you for sharing your concerns with us. We want you to get the advice you need for this issue. Please reach out to our support team for assistance.

    https://www.arubainstanton.com/contact-support/ 



    ------------------------------
    Aruba Instant On Communications
    ------------------------------

    Original Message