Hi,
I got an Aruba AP11, after the first time booting it fialed after registering, it was going to update and now no aos is mote on the AP. Logging on with console cable tells me also this.
Can I someone provide me the image for the ap11 so I can tftpboot this and get it working again?
APBoot 2.5.0.2 (build 70487)
Built: 2019-05-14 at 12:27:57
Model: AP11
DRAM: 512 MiB
Flash: Detected MX25R3235F: with write protection total 4 MiB
NAND: 128 MiB
Power: POE
UBI error: check_sv: bad scanning information, error 1
UBI error: ubi_init: cannot attach mtd2
UBI error: ubi_init: UBI error: cannot initialize UBI, error -22
Volume aos0 not found!
Creating dynamic volume aos0 of size 0
UBI error: ubi_create_volume: cannot create volume -1, error -23
Volume aos1 not found!
Creating dynamic volume aos1 of size 0
UBI error: ubi_create_volume: cannot create volume -1, error -23
Volume ubifs not found!
Creating dynamic volume ubifs of size 0
UBI error: ubi_create_volume: cannot create volume -1, error -23
Net: eth0
Radio: ipq4019#0, ipq4019#1
FIPS: passed
Hit <Enter> to stop autoboot: 0
apboot> ?
boot - boot the OS image
clear - clear the OS image or other information
dhcp - invoke DHCP client to obtain IP/boot params
factory_reset- reset to factory defaults
help - print command description/usage
mfginfo - show manufacturing info
osinfo - show the OS image version(s)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
purgeenv- restore default environment variables
reset - Perform RESET of the CPU
saveenv - save environment variables to persistent storage
setenv - set environment variables
tftpboot- boot image via network using TFTP protocol
upgrade - upgrade the APBoot or OS image
version - print monitor, compiler and linker version
apboot> osinfo
Partition 0Volume aos0 not found!
does not contain a valid OS image
Partition 1Volume aos1 not found!
does not contain a valid OS image
apboot>
------------------------------
Richard Kroonen
------------------------------