Hello everyone,
I've replaced two previous HP switchs (1920S 48G 4SFP) by another two HP (1930 48G 4SFP/SFP+), and now I've some odd issues with those, and I really dont know why, but I hope that the Aruba community with more exp than me, can guide me here.
On my previous setup, I was using only one firewall connected to one switch, and each switch was connected by only one ethernet cable. There was only one SFP transceiver in one connected to another secundary cabinet. Before installing this new solution, there was no packet loss's on the device that I've (I've around 25 devices on Switch A1 and around 40 on Switch A2), there was no latency for at least one of the services that my endusers reported having it.
Network diagram:
------------------------------
Fábio Cabrita
------------------------------