Everything Instant On

Expand all | Collapse all

When connecting clients via eth port on AP11D they are not shown in clients inventory

  • 1.  When connecting clients via eth port on AP11D they are not shown in clients inventory

    Posted 09-16-2019 03:11 PM

    When using AP11D it is very handy to be able to connect both wired and wireless , i noticed however that devices connected via wired ports do not show up in the connected devices inventory. Nor does the traffic they generate is taken into account in the traffic breakdown by category overview.

    It would be very nice and in fact logical if this were possible.



  • 2.  RE: When connecting clients via eth port on AP11D they are not shown in clients inventory

    Posted 09-17-2019 12:53 PM

    @yousch Thank you for the feedback and this will be passed along to the product team for review.



  • 3.  RE: When connecting clients via eth port on AP11D they are not shown in clients inventory

    Posted 09-17-2019 03:58 PM
    Hi, Right now, the wired ports on the AP11D are bridged, but as you know we continuously make updates to the product every software release.