Everything Instant On

 View Only

  • 1.  1960 48G | Stack Standalone | Interfaces

    Posted 03-16-2023 11:51 AM

    Hello together, 

    While configuring our new Aruba Instant On 1960 48G 2XGT 2SFP+ switch (JL808A) in conjunction with our NAC solution, we noticed that when reading out the switch interfaces via SNMP, the number of interfaces is 208. The interfaces for 4 stack switches are read out via the SNMP Mibs, although the switch itself is not configured in the stack, but acts as a standalone device in the network.

    Therefore my question is, if there is a possibility to change the behavior so that only the real interfaces (52) are read out and not all possible additional virtual interfaces.

    Best



    ------------------------------
    Marc Schmidt
    ------------------------------


  • 2.  RE: 1960 48G | Stack Standalone | Interfaces

    Employee
    Posted 03-23-2023 03:57 PM

    Thanks for the feedback, we will check internally, can you please us the SNMP OID and the output, which shows the 208 interfaces?



    ------------------------------
    Aruba Instant On Communications
    ------------------------------

    Original Message


  • 3.  RE: 1960 48G | Stack Standalone | Interfaces

    Posted 03-24-2023 05:03 AM
      |   view attached

    Sure no problem. 
    The following OID was used to read the interfaces: Rfc1213Mib.ifTable(1.3.6.1.2.1.2.2)

    Attached you can find the complete result of the SNMP operation. 



    ------------------------------
    Marc Schmidt
    ------------------------------

    Attachment(s)

    txt
    IfMib_Result.txt   215 KB 1 version
    Original Message