Instant On - Wireless

Expand all | Collapse all

Is it possible to use multi-SSID and VLAN on AP11?

  • 1.  Is it possible to use multi-SSID and VLAN on AP11?

    Posted 10-02-2020 06:40 AM

    Is it possible to use multi-SSID with AP11?
    Also, can I assign a VLAN for each SSID?



  • 2.  RE: Is it possible to use multi-SSID and VLAN on AP11?

    Posted 10-02-2020 11:02 AM

    @uema All Instant ON AP's support up to 8 SSID's and the AP11 does not have the ability to have multiple VLAN's supported. The AP's support doing NAT.



  • 3.  RE: Is it possible to use multi-SSID and VLAN on AP11?

    Posted 10-05-2020 02:15 PM

    Do any of the instant on AP's support multiple vlans? This is ciritcal for segregating untrustworthy IOT devices even on a home network.



  • 4.  RE: Is it possible to use multi-SSID and VLAN on AP11?

    Posted 10-05-2020 04:16 PM

    @bleo 

    You can set one VLAN for each SSID (or per Network).  I have such a setup where I put my IoT devices on their own VLAN and then set the Network Access to Restricted in the configuration, which isolates those devices from my other private networks.

    Quite easy to setup too if you are using the 1930 Instant On switch.

     



  • 5.  RE: Is it possible to use multi-SSID and VLAN on AP11?

    Posted 10-08-2020 05:20 AM

    You can use VLAN on AP11D