Hello, i need help to restore a file backup to 1930 switch from local managment. I know how to download a file, but I don´t know how to apply changes when I upload this file to other 1930 switch. Someone can I help me, please ?
@jmanrique Take a look at the configuration guide.
1930 Switch Series Management and Configuration Guide
Thanks for the manual, it is in the first place that I look for how to do the recovery, but it does not explain how to apply the changes or I do not understand it. Could you please explain to me how after uploading the recovery file how to proceed to apply the settings from that file? Thank you very much in advance.
@jmanrique Download the startup-config from the backup and update files and edit the file in notepad if needed save the file. Then from backup and update files select update file and choose Startup-config and select your transfer protocol. and then start transfer and then reboot the switch from the reset tab and do not save changes when prompted and you should have your new config running once the reboot is complete.