Sure no problem.
The following OID was used to read the interfaces: Rfc1213Mib.ifTable(1.3.6.1.2.1.2.2)
Attached you can find the complete result of the SNMP operation.
------------------------------
Marc Schmidt
------------------------------
Original Message:
Sent: 03-23-2023 03:56 PM
From: JM52
Subject: 1960 48G | Stack Standalone | Interfaces
Thanks for the feedback, we will check internally, can you please us the SNMP OID and the output, which shows the 208 interfaces?
------------------------------
Aruba Instant On Communications
Original Message:
Sent: 03-16-2023 11:51 AM
From: MSchmidt1003
Subject: 1960 48G | Stack Standalone | Interfaces
Hello together,
While configuring our new Aruba Instant On 1960 48G 2XGT 2SFP+ switch (JL808A) in conjunction with our NAC solution, we noticed that when reading out the switch interfaces via SNMP, the number of interfaces is 208. The interfaces for 4 stack switches are read out via the SNMP Mibs, although the switch itself is not configured in the stack, but acts as a standalone device in the network.
Therefore my question is, if there is a possibility to change the behavior so that only the real interfaces (52) are read out and not all possible additional virtual interfaces.
Best
------------------------------
Marc Schmidt
------------------------------