Hello,We have an existing Aruba 505 AP and Aruba 505h AP cluster network and recently added the Aruba 303, which is not visible in the AP/device list of the virtual controller. I doesn't matter if the 505 or 505h is set as the master AP. When I scan the network and try to access the webportal via IP-adres of the Aruba 303, it redirects me to the IP-adres and virtual controller though (?). The strange thing is that I'm able to get the Aruba 303 in the virtual controller with the Aruba 505 but then the Aruba 505H won't show up anymore in the device/AP list of the virtual controller. Also, when I scan the network and try to access the webportal via IP-adres of the Aruba 505H, it redirects me to the virtual controller as wel. I've tried resetting all the AP but the result is the same.additional information:Firmware: 22.214.171.124_83631 Virtual controller is set on a different IP-adres then the master AP.
I hope someone can shed some light on this problem we are experiencing.Kind regards,Mathijs